Instrument an
d
control functions
4-9
4
To switch the average fuel consump-
tion settings, push and hold the left set
button until the display changes.
To reset the average fuel consumption,
select it by pushing the left set button.
The average fuel consumption display
will flash for a few seconds. While the
display is flashing, push the right set
button for one second.
TIP
After resetting the average fuel con-
sumption, “_ _._” will be shown until
the vehicle has traveled 1 km (0.6 mi).
Coolant temperature
This shows the coolant temperature
from 104 °F to 242 °F in 1 °F incre-
ments.
If the message “Hi” flashes, stop the
vehicle, then stop the engine, and let it
cool. (See page 7-39.)
TIP
When the coolant temperature is
below 104 °F, “Lo” will be dis-
played.
The coolant temperature varies
with changes in the weather and
engine load.
Air temperature
This shows the air temperature from 14
°F to 210 °F in 1 °F increments. The
temperature displayed may vary from
the ambient temperature.
TIP
When the temperature is below 14
°F, “Lo” will be displayed.
The accuracy of the temperature
reading may be affected by engine
heat when riding slowly (under 20
km/h [12 mi/h]) or when stopped
at traffic signals, etc.
Self-
d
ia
g
nosis mo
d
e
1. Coolant temperature display
1
1. Air temperature display
1
1. Error code display
2. Engine trouble warning light “
”
2
1
UB4C11E0.book Page 9 Thursday, October 11, 2018 11:23 AM
Downloaded from
ManualsNet.com
