background image

Instrument and control functions

5-14

1

2

3

4

5

6

7

8

9

10

11

12

13

page 5-16.)

TIP

YRC settings shown on the bottom
of the main screen (PWR, TCS,
and SCS) can be adjusted inde-
pendently from the main screen.

YRC settings shown on the top of
the main screen (QS “

”, QS

”, LIF, BC “

” and EBM) can-

not be adjusted independently
from the main screen. To change
these values, use the YRC Setting
MENU. (See page 5-16.)

The LIF icon only show as active/
inactive but have different setting
levels that can be adjusted in the
YRC Setting MENU. (See
page 5-16.)

The BC “

” and EBM icons show

both active/inactive as well as the
current setting level.

The YRC modes come preset from the
factory for different riding conditions.
When using the factory presets, the
suggested YRC modes are as follows.
MODE-A: suitable for track riding
MODE-B: softer track-riding setting
MODE-C: suitable for road use

MODE-D: street use or rainy weather

To change YRC modes or make setting
changes

1. Use the “MODE” switch to scroll

left to right and highlight the item
you want to adjust.

2. Use the MODE up “

” or MODE

down “

” switches to change the

selected item value.

TIP

When the engine trouble warning
light “

”, the auxiliary system

warning “

”, or the coolant tem-

perature warning “

” are on, YRC

settings cannot be adjusted.

When a YRC function is actively
engaged that item cannot be ad-
justed. For example, when accel-
erating PWR cannot be adjusted.

When a YRC item is highlighted
but cannot be adjusted, the YRC
item box will return to black.

Turning off the traction control system
To turn off the traction control system,
select TCS with the “MODE” switch,
then press and hold the MODE up “

switch until TCS OFF is displayed.
To turn the traction control system back
on, select TCS OFF and then press the
MODE down “

” switch (the traction

control system will return to its previous
setting).

TIP

Turning off the traction control system
will turn off the SCS and LIF systems
for all YRC mode presets.

Lap timer

This stopwatch function measures and

12

34

12

LAP 

09

56

N

GEAR

QS

LIF

1

12:00  

EBM

-

1

MODE-

A

PWR

 1

TCS

  3

SCS

  1

1000 r/min

OFF

1234.5

TRIP-1

MPH

mile

MODE-

A

MODE-

A

B5Y-28199-11-E0.book  14 ページ  2022年9月6日 火曜日 午前10時28分

Summary of Contents for MT-10 2023







































































































































Reviews: