background image

MS101-4 Owner’s Manual

3

PRECAUTIONS

PLEASE READ CAREFULLY 
BEFORE PROCEEDING 

Please keep this manual in a safe 
place for future reference.

 WARNING

Always follow the basic precautions 
listed below to avoid the possibility of 
serious injury or even death from 
electrical shock, short-circuiting, 
damages, fire or other hazards. These 
precautions include, but are not limited 
to, the following:

If you notice any abnormality

• If any of the following problems occur, 

immediately turn off the power switch and 
disconnect the electric plug from the outlet. 
- The power cord or plug becomes frayed 

or damaged.

- Unusual smells or smoke are emitted.
- Some object, or water has been dropped 

into the product.

- There is a sudden loss of sound during 

use of the product.

- Cracks or other visible damage appear on 

the product.

Then have the product inspected or 
repaired by qualified Yamaha service 
personnel.

Power supply

• Do not place the power cord near heat 

sources such as heaters or radiators, and 
do not excessively bend or otherwise 
damage the cord, place heavy objects on it, 
or place it in a position where anyone could 
walk on, trip over, or roll anything over it.

• Only use the voltage specified as correct for 

the product. The required voltage is printed 
on the name plate of the product.

• Use only the supplied power cord.

If you intend to use the product in an area 
other than in the one you purchased, the 
included power cord may not be 
compatible. Please check with your Yamaha 
dealer.

• Check the electric plug periodically and 

remove any dirt or dust which may have 
accumulated on it.

• Make sure to fully insert the electric plug to 

prevent electric shocks or fire.

• When setting up the product, make sure that 

the AC outlet you are using is easily 
accessible. If some trouble or malfunction 
occurs, immediately turn off the power 
switch and disconnect the plug from the 
outlet. Even when the power switch is 
turned off, as long as the power cord is not 
unplugged from the wall AC outlet, the 
product will not be disconnected from the 
power source. 

• Remove the electric plug from the outlet 

when the product is not to be used for 
extended periods of time.

• Do not touch the product or the electric plug 

during an electrical storm.

Do not open

• This product contains no user-serviceable 

parts. Do not attempt to disassemble the 
internal parts or modify them in any way. 

Water warning

• Do not expose the product to rain, use it 

near water or in damp or wet conditions, or 
place on it any containers containing liquids 
which might spill into any openings. 

• Never insert or remove an electric plug with 

wet hands.

Fire warning

• Do not place any burning items or open 

flames near the product, since they may 
cause a fire.

PA-12 1/2

Summary of Contents for MS101-4

















Reviews: