Yamaha MRX7-D Owner'S Manual Download Page 19

Page: 19 / 36

MRX7-D Owner’s Manual

Various Procedures

With the MTX/MRX system, input/output port patching, matrix
mixer settings, and the parameters of XMV amps within the
same MTX/MRX system are stored together as a “preset” in the
MRX7-D and in MTX-MRX Editor for recall when desired.
Each MTX/MRX system can store 50 presets. MTX-MRX Edi-
tor is used to edit presets.

Each preset contains settings such as the following.

• Input/output port settings and patching
• Input/output channel gain and EQ settings
• Matrix mixer settings
• Zone settings
• Routing settings
• Effect settings
• DCA and mute group settings
• Parameter settings for XMV devices within the same MTX/

MRX system

• Preset name

For details, refer to “MTX-MRX Editor User’s Manual.”



Switching presets from the MRX7-D

1. While watching the [PRESET] display, use

the [

]/[

] buttons to select the preset

number that you want to recall.

The [PRESET] display will flash during this time.

2. Press the [ENTER] button to confirm your

selection.

The [PRESET] display will stop flashing; the preset has
been recalled.

Each time the devices connected to the MTX/MRX system are
brought online, the date and time of the computer will be trans-
mitted to all devices, automatically updating their internal
clocks.
You can also update the date and time settings on all devices
connected to the same network by transmitting the computer’s
date and time settings from the “Clock” dialog box in MTX-
MRX Editor.
For more information on operation, refer to “MTX-MRX Editor
User’s Manual.”

The scheduler can switch presets or play music and sound
effects from the SD memory card at the date and time you spec-
ify. Each such setting is called an “event.”
Event settings are made in the “Scheduler” dialog box of MTX-
MRX Editor. For details on operation, refer to “MTX-MRX
Editor User’s Manual.”

< Example 1 >
Switching background music and playback area
according to the time of day

In commercial facilities that switch background music and play-
back areas at different times of the day, you can switch the type
of music and the playback area according to the time of day.

< Example 2 >
Switching the playback time according to the day
of the week

In commercial facilities that switch the time period of music
depending on the day of the week, you can specify the music
pattern and playback times according to the day of the week and
the hours of operation.

• Monday–Friday

• Saturday

• Sunday

You can also play seasonal music, or specify exceptions such as
stopping playback on days when the facility is not operating.

Recalling (switching) presets

NOTE

• If you leave the device for 30 seconds with the [PRE-

SET] display flashing, it will revert to the previous pre-
set number.

• If a control panel such as a DCP series unit is con-

nected, you’ll be able to easily switch presets.

Setting the clock

Using the scheduler