manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Owner'S Manual

The Yamaha MOTIF6 Voice Editor is a powerful software tool that allows users to easily customize and edit the voices of their Yamaha MOTIF6 synthesizer. With this intuitive manual, available for free download at manualshive.com, users can explore endless possibilities and enhance their music production experience.

Share
Download
background image

246

MOTIF  Reference

Sampling Job mode 

Reference

  

Sampling mode

• Type 

Determines which channel, or both channels, of the stereo 
sample will be converted to a mono sample.

❏

Settings

L+R>mono
The left and right channels of the stereo sample are mixed 
and converted to a mono sample.

L>mono
The left channel of the stereo sample is converted to a 
mono sample.

R>mono
The right channel of the stereo sample is converted to a 
mono sample.

●

 [F1]-11 Loop-Remix

This Job lets you automatically cut the sample into 
separate “slices” and randomly rearrange the slices 
for special effects and unusual rhythmic variations.  
A variety of audio transform operations are also 
included for even greater changes in the sound.

• Type 

Determines the degree to which the looped portion of the 
sample will be sliced.

❏

Settings

1~4

• Variation

Determines how the original sample is varied by the this 
Job.

❏

Settings

normal1, 2
These settings slice and rearrange the sample data, 
without performing any other audio changes.

reverse1, 2
In addition to slicing and rearranging, these settings 
reverse the playback of some of the slices.

●

 [F1]-12 Slice

This Job lets you divide the sample into separate 
“slices,” the number of which is determined by the 
note length (with Measure, Meter, and SubDivide).  
When entering this Job from the Song/Pattern 
mode, note data for playing the slices in sequence is 
also created.  (Keep in mind that the results of this 
Job vary depending on the previously selected 
mode: Voice/Performance or Song/Pattern.)

With the exception of the parameter below, all 
parameters and settings are the same as in the Slice 
display of the Sampling Record mode (page 238).

• Lowest Key

Specifies the lowest key number from which the sliced 
samples are ordered. 

❏

Settings

C - 2 ~G8

n

In the Slice display of the Sampling Record mode 
(page 238), this parameter is fixed to “C-1” for the 
MOTIF6, “E0” for the MOTIF7, “A-1” for the 
MOTIF8, and cannot be set.

Set the Waveform and Key Bank containing the
sample to be Loop-remixed.

Press the [ENTER] 
button to
execute the Job.

Press the [F6] (OK) button to assign the 
Loop-remixed sample to the specified Key Bank.

Press the [ENTER] button to execute the operation. 
If you re not satisfied with the results, change the Type 
and Variation values and press the [ENTER] button again. 
This automatically reverts back to the original settings and 
executes the operation again with the new settings.

Press the [F5] (CANCEL) button to 
cancel the operation.

Set the Waveform and Key Bank containing the
sample to be sliced.

Press the [ENTER] 
button to execute 
the Job.

Press the [F6] (OK) button to assign the sliced
sample to the specified Key Bank.

Press the [ENTER] button to execute the operation. If 
you re not satisfied with the results, edit the various 
parameters and press the [ENTER] button again. This 
automatically reverts back to the original settings and 
executes the operation again with the new settings.

Press the [F5] (CANCEL) button to
cancel the operation.

Summary of Contents for MOTIF6 Voice Editor













































































































































































































































































































Reviews:

No comments

Related manuals for MOTIF6 Voice Editor

Canon iR2270 Series Product Description preview
iR2270 Series
Brand: Canon Pages: 2
Canon Pixma Pro9500 Series Manual preview
Pixma Pro9500 Series
Brand: Canon Pages: 31
Canon PowerShot SD430 DIGITAL ELPH WIRELESS Software & Wireless Manual preview
PowerShot SD430 DIGITAL ELPH WIRELESS
Brand: Canon Pages: 130
Canon PowerShot SD880 IS Digital ELPH Software Starter Manual preview
PowerShot SD880 IS Digital ELPH
Brand: Canon Pages: 83
Canon Selphy CP600 Printer Software Manual preview
Selphy CP600
Brand: Canon Pages: 34
Canon N1240U - CanoScan Flatbed Scanner User Manual preview
N1240U - CanoScan Flatbed Scanner
Brand: Canon Pages: 109
Yamaha MOTIF RACK ES Supplementary Manual preview
MOTIF RACK ES
Brand: Yamaha Pages: 37
McAfee WEBSHIELD SMTP Datasheet preview
WEBSHIELD SMTP
Brand: McAfee Pages: 2
Olympus CAMEDIA Master Software Installation Manual preview
CAMEDIA Master
Brand: Olympus Pages: 2
ICP GDT monitor Manual preview
GDT monitor
Brand: ICP Pages: 60
MACROMEDIA BREEZE 5 Integration Manual preview
BREEZE 5
Brand: MACROMEDIA Pages: 232
Lenovo ThinkCentre A58 Specifications preview
ThinkCentre A58
Brand: Lenovo Pages: 2
Novell ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE Manual preview
ZENWORKS APPLICATION VIRTUALIZATION - V8.0.3 INTEGRATION AND STREAMING GUIDE
Brand: Novell Pages: 36
Novell ZENworks 10 Configuration Management Upgrade Manual preview
ZENworks 10 Configuration Management
Brand: Novell Pages: 32
Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009 Installation Manual preview
ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009
Brand: Novell Pages: 134
Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Reference Manual preview
ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010
Brand: Novell Pages: 200
Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0 Administration Manual preview
OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0
Brand: Novell Pages: 77
Novell LINUX ENTERPRISE REAL TIME 10 SP1 Quick Start Manual preview
LINUX ENTERPRISE REAL TIME 10 SP1
Brand: Novell Pages: 7

Brands by name

Popular brands

Load more brands