manualshive.com logo in svg

Yamaha MOTIF6 Voice Editor, Owner'S Manual

The Yamaha MOTIF6 Voice Editor is a powerful software tool that allows users to easily customize and edit the voices of their Yamaha MOTIF6 synthesizer. With this intuitive manual, available for free download at manualshive.com, users can explore endless possibilities and enhance their music production experience.

Share
Download
background image

243

MOTIF  Reference

Sampling Job mode

Reference

  

Sampling mode

n

If all the samples of the specified Waveform are 
deleted, the Waveform itself is deleted. 

●

 [F1]-03 Extract

This Job deletes all unnecessary sample data 
(located ahead of the Start point and located after 
the End point). In effect, it extracts only the sample 
data you want to use, trimming all unneeded sound 
from the start and end of the sample. 
If the Key Bank is set to “all” and the Job is 
executed, this Job is applied to all the samples of the 
selected Waveform. 

●

 [F1]-04 Move

This Job lets you move a sample contained in a 
specified Key Bank to another Key Bank.  This 
would be useful for creating a new Waveform from 
the samples of various other existing Waveforms.

n

If the last remaining sample is moved from the 
source Waveform, the source Waveform itself is 
deleted. 

●

 [F1]-05 Normalize 

This Job maximizes (normalizes) the overall level of 
the specified sample. The “100” (100%) setting is a 
quick and convenient way to boost the level of an 
entire sample, to make it as loud as possible without 
distorting.  

• Ratio

Specifies the post-normalization sample level.
A setting of 100% maximizes the level so that the highest 
peak level in the sample is just below clipping (maximum 
digital signal level).
Settings below 100% reduce the level of the sample 
accordingly.
Settings higher than 100% will raise the sample level 
above the maximum, producing deliberate clipping.

❏

Settings

001-800%

Waveform and Key Bank containing
the sample to be deleted

Waveform and Key Bank containing
the sample to be extracted

Start Point

End Point

Start Point

End Point

Extract

Source Waveform and Key Bank

Destination Waveform and Key Bank

Set the Waveform and Key Bank containing the
sample to be normalized.

Press the [ENTER] button to
execute the Job.

Press the [F6] (OK) button to assign the
normalized sample to the specified Key Bank.

Press the [ENTER] button to execute the 
operation. If you re not satisfied with the 
results, change the Ratio value and press the 
[ENTER] button again.
This automatically reverts back to the original
settings and executes the operation again 
with the new settings.

Press the [F5] (CANCEL) button to
cancel the operation.

Original Wave

Lower than 100%

100%

Higher than 100%

Summary of Contents for MOTIF6 Voice Editor













































































































































































































































































































Reviews:

No comments

Related manuals for MOTIF6 Voice Editor

NEC NEAX 2000 IVS User Manual preview
NEAX 2000 IVS
Brand: NEC Pages: 81
Altigen AltiWare OE 4.6 Administration Manual preview
AltiWare OE 4.6
Brand: Altigen Pages: 518
NAPCO BADGING3000 Datasheet preview
BADGING3000
Brand: NAPCO Pages: 2
Sony Walkman D-NE1 Datasheet preview
Walkman D-NE1
Brand: Sony Pages: 1
Sony Walkman D-NE319 Specifications preview
Walkman D-NE319
Brand: Sony Pages: 2
Sony VGN-TX850P Specifications preview
VGN-TX850P
Brand: Sony Pages: 2
Sony VAIO VGN-TXN17P/T Specifications preview
VAIO VGN-TXN17P/T
Brand: Sony Pages: 2
Sony VAIO VGN-TXN19P Specifications preview
VAIO VGN-TXN19P
Brand: Sony Pages: 2
Sony VAIO VGN-TXN17P/B Specifications preview
VAIO VGN-TXN17P/B
Brand: Sony Pages: 2
Sony VAIO VGN-TXN15P/W Specifications preview
VAIO VGN-TXN15P/W
Brand: Sony Pages: 2
Sony VAIO VGN-TXN15P/T Specifications preview
VAIO VGN-TXN15P/T
Brand: Sony Pages: 2
Sony VAIO VGN-TXN15P/B Specifications preview
VAIO VGN-TXN15P/B
Brand: Sony Pages: 2
Sony VAIO VGN-TXN15P - VAIO - Core Solo 1.2 GHz Service Manual preview
VAIO VGN-TXN15P - VAIO - Core Solo 1.2 GHz
Brand: Sony Pages: 24
Sony Network Camera Recorder V 1.0 User Manual preview
Network Camera Recorder V 1.0
Brand: Sony Pages: 37
Sony MZ-M10 Operating Instructions Manual preview
MZ-M10
Brand: Sony Pages: 115
Sony VGN-TX850P User Manual preview
VGN-TX850P
Brand: Sony Pages: 202
Sony Pro 10 User Manual preview
Pro 10
Brand: Sony Pages: 382
Emagic Logic fun User Manual preview
Logic fun
Brand: Emagic Pages: 256

Brands by name

Popular brands

Load more brands