Yamaha MOTIF6 Voice Editor Page 228 Owner'S Manual Download | Manualshive

Page: 228 / 300

background image

228

MOTIF Reference

Pattern Job mode

Reference

Patter

n mode

●

[F3]-07 Modify Control Data

Same as in the Song Job mode. See page 200.

n

Unlike in the Song Job mode, you cannot select
“Tempo” as an Event Type.

●

[F3]-08 Beat Stretch

Same as in the Song Job mode. See page 200.

[F4] Phrase Job

Press the [F4] button in step #3 of the Basic Procedure
on page 225 so that the Phrase Job list appears on the
display. Scroll the cursor to the desired Job and press the
[ENTER] button to go to the display of the selected Job.

The following explanations apply to step #6 of the
Basic Procedure on page 225.

●

[F4]-01 Copy Phrase

This Job copies a selected phrase to the designated
destination phrase.

Any previous data in the copy destination will be
overwritten.

Undo/Redo (page 225) cannot be used to undo/redo a
sample voice copy operation.

n

When there is no memory available in the
destination style for sample voice data, an error
message will appear on the display and the sample
voice data will not be copied. If this occurs, use
Sample Job 02 “Delete” to delete any unused
sample voices, then try again.

●

[F4]-02 Exchange Phrase

This Job exchanges or “swaps” the contents of two
specified phrases.

n

If this Job is applied to phrases which use sample
voices, the sample voices will not be exchanged.

●

[F4]-03 Mix Phrase

This Job mixes all data from two selected user
phrases (“A” and “B”), and places the result in
phrase B. One useful application for this would be
to free up the data in phrase A, letting you record
new data to it.

n

Keep in mind that applying this Job to phrases with
sample voices does not mix the sample voices.

Specify the phrase and the range (in measures/
beats/clocks) over which the Job is applied.

Specify the phrase and the range (in measures/
beats/clocks) over which the Job is applied.

Selects the style and phrase to be copied.
(Preset phrase also can be selected.)

Specify the destination
style and phrase.

When this box is checkmarked, sample voices used by the
source phrase are copied to the destination style as
sample voices, and are assigned to the destination phrase.

Target phrases for the Exchange operation

Phrase B

Mix Phrase

Phrase B

Phrase A

«
...
226
227
228
229
230
...
»

Summary of Contents for MOTIF6 Voice Editor













































































































































































































































































































Reviews:

No comments

Related manuals for MOTIF6 Voice Editor

BMP5 Direct SDK

Brand: Campbell Pages: 32

TICKETMASTER - LEARN MORE

Brand: Blackberry Pages: 7

MultiRack SoundGrid

Brand: Waves Pages: 39

Web SmartDeviceMonitor Standard

Brand: Ricoh Pages: 1

FastTrak SX Series Version 4.4

Brand: Promise Technology Pages: 102

APPLICATION STACK 1.4 RELEASE

Brand: Red Hat Pages: 22

DEVICE-MAPPER MULTIPATH 4.6

Brand: Red Hat Pages: 42

NORTON INTERNET SECURITY - FOR MAC V4

Brand: Symantec Pages: 28

CONFLICTMANAGER

Brand: Symantec Pages: 54

Brand: AMX Pages: 54

One Stop Vocal Processing Plug-in Vocalstrip

Brand: Solid State Logic Pages: 21

Brand: Eagle Pages: 80

Brand: FieldServer Pages: 11

00308-011408-9F30A - VLA AUTOSKETCH R8-MEDIA W9X/NT

Brand: Autodesk Pages: 400

Brand: KapLogic Pages: 24

Brand: LXE Pages: 260

Brand: Tascam Pages: 13

WeatherLink APRS

Brand: DAVIS Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands