111
MOTIF XS6/MOTIF XS7/MOTIF XS8
TEST PROGRAM
Tests Overview
Number
Item
Measurement Conditions, etc.
Test Code
T00-1
MAC Address Read/Write
Write/Read MAC Address
A02200
T01
EBUS ID Check
OK/NG
Read each EBUS ID
A02100
T02
LCD,LED
Visual check
LCD: Color, white/black
LED: ALL on/off
A00200
T03
Panel Switch, LED
OK/NG
with TONE (1 KHz)
A00400
T04
Encoder
OK
0 – +8 – -8
A00500
T05
Knob
OK
0 – 127 – 64
A00600
T06
Slider
OK
0 – 127
A00700
T07
1KeyOn
OK KeyCode=C3
A00800
T08
Keyboard After Touch
OK/NG
With TONE (1 KHz) 127 – 0, offset (XS8 only)
A00900
T09
Pitch Bend Wheel
OK
64 – 127 – 0
A00A00
Modulation Wheel
0 – 127
Ribbon Controller
[0 – 15] – [90 – 112] – off[113 – 127]
T10
Foot Controller 1,2
OK
0 – 127
A00B00
Foot Switch
0 – 1
Assignable
0 – 1
Sustain(FC3)
35 – 101
T11
MIDI In/Out/Thru
OK/NG
Check Thru (except MIDI Mode)
T12
USB to DEVICE
OK/NG
Device identi
fi
cation test (USB Memory)
A00C00
T13
USB to HOST
OK/NG
USB loop test with “TO DEVICE” side
A00D00
T14
1KHz OUTPUT-L output
Measurement
OUTPUT(L)=+5.0 ± 2 dBu, (R)=-85.0 dBu or less (10 K
Ω
)
A00E00
AS-OUT(L)=+4.0 ± 2 dBu, (R)=-85.0 dBu or less (10 K
Ω
)
DIGITAL OUT-L
PHONES(L)=-2.0 ± 2 dBu, (R)=-70.0 dBu or less (33
Ω
)
T15
1KHz OUTPUT-L output
Measurement
OUTPUT(R)=+5.0 ± 2 dBu, (L)=-85.0 dBu or less (10 K
Ω
)
A00F00
AS-OUT(R)=+4.0 ± 2 dBu, (L)=-85.0 dBu or less (10 K
Ω
)
DIGITAL OUT-R
PHONES(R)=-2.0 ± 2 dBu, (L)=-70.0 dBu or less (33
Ω
)
T16
AD
g
DA (MIC)
Measurement
OUTPUT(L)=+4.0 ± 2 dBu, (R)=-60.0 dBu or less (10 K
Ω
)
A01000
Lch INPUT SW
T17
AD
g
DA (LINE)
Measurement
OUTPUT(R)=+4.0 ± 2 dBu, (R)=-70.0 dBu or less (10 K
Ω
)
A01100
Rch INPUT SW
T18
DIMM
OK/NG Capacity
+R/W
A01900
T19
DIMM
OK/NG Full
Test
A01A00
T20
ROM
OK/NG
SYSTEM ROM ID Read
A01B00
OK/NG
WAVE ROM Data Read
T21
SYSTEM RAM
OK/NG
R/W
A01C00
EFFECT RAM
T22
mLAN
OK/NG
In addition, audibly check stereo output
A01D00
T23
ETHERNET
OK/NG Read/Write
A02000
T24
Factory Set
OK
Initialized condition/with factory set caution descriptions
A01E00
T25
Exit(Noise Level)
Measurement
OUTPUT (L, R)= -90.0 dBu or less (10 K
Ω
)
A01F00
AS-OUT (L, R)= -90.0 dBu or less (10 K
Ω
)
(R)=-90.0 dBu or less (33
Ω
)
Measurement Conditions
To test the unit in MANUAL MODE, the following measuring instruments and jigs are required.
Measuring Instruments:
Frequency counter, Oscilloscope, Level meter (with JIS-C curve), Distortion factor meter, Oscillator, etc.
Jigs:
PC
∗
1
, MIDI cable, DIMM memory board, mLAN16E2 (mLAN option board: XS6, 7), USB memory (2.0), USB cable (A-B
Type), Ethernet cable (LAN cable), Keyboard amplifier, MD player (w/digital inputs), Wired LAN router (w/DHCP server
function [Ex.: Buffalo BBR-4MG]), Foot pedal (FC3), Foot switch (FC4 or FC5), Foot controller (FC7), IEEE1394 repeater
hub
∗
2
[Ex.: Sanwa Supply 1394-RP2GPH], IEEE1394 cable
∗
2
, etc.
∗
1
: Used in “T00-1 MAC Address Read/Write”.
Operating environment: Pentium 200 MHz or faster, Windows 2000/XP Home Edition/XP Professional
∗
2
: XS8 and XS6 or XS7 with mLAN16E2 (Option board)
