manualshive.com logo in svg

Yamaha Motif-Rack XS, Owner'S Manual

The Yamaha Motif-Rack XS is a versatile music production synthesizer, ideal for both studio and live performances. Unlock the full potential of this powerful instrument by downloading the free user manual from manualshive.com. The comprehensive manual includes a detailed code list, providing valuable insights into mastering your music creation process.

Share
Download
background image

Multi Mode

MOTIF-RACK XS Owner’s Manual

96

Basic Structure

Ref

erence

V

oice

Multi

Utility

The Contr

ols & 

Connector

s

Setting Up 

Listening to

the Sound

Connections

Using a Computer

Quic

k Guide

Appendix

3

 Arp Select (Arpeggio Select)

Determines whether the item being edited will commonly affect all five Arpeggios assigned to each Voice (“Arp Edit”), or affect only the 
selected Arpeggio (“Arp 1 – 5 Type”). The parameters other than the parameters listed below are same as the corresponding parameters in 
the Arp Select display (page 66) in Voice Common Edit. 

n

The Arpeggio tempo can be set in the Arpeggio display (page 91) of Multi Common Edit.

Arp Edit (Arpeggio Edit)

Arp MIDI Out Sw 
(Arpeggio MIDI Output Switch)

Determines whether Arpeggio playback data is output to the external devices as MIDI messages. 
When this is set to on, the data is output.

Settings: 

off (not output), on (output)

Arp Transmit Ch 
(Arpeggio Transmit Channel)

Determines the MIDI transmit channel for Arpeggio playback data. When this is set to “rcv ch 
(receive channel),” Arpeggio playback data is output via the same MIDI channel (transmit) set in the 
Receive Ch parameter (page 94) in the Voice display of Multi Part Edit.

Settings: 

1 – 16, rcv ch (receive channel)

Voice with Arp 
(Voice with Arpeggio)

Each Arpeggio type is assigned a specific Voice best suited to the type. This parameter determines 
whether or not the appropriate Voice registered to each Arpeggio type is assigned to the edited 
Part. When set to “on,” the appropriate Voice is assigned to the edited Part in place of the currently 
assigned Voice. When set to “off,” the appropriate Voice is not assigned to the edited Part. The 
currently assigned Voice is maintained.

Settings: 

off (not copied), on (copied)

Arp 1 – 5 Type (Arpeggio 1 – 5 Type)

When the Voice with Arp parameter set to “on” in the Arp Edit display of Multi Part Edit, changing the Main Category, Sub Category, and Type 
parameters in this display result in displaying the resultant Bank, Number, Name of the Part Voice as popup window.

4

 Filter

The settings made here will be applied as offsets to the Filter settings of each Element set for each Part Voice.

Cutoff

Determines the common offset value of filter Cutoff Frequencies for all Elements set to each Part 
Voice. This parameter can be changed directly via the Knob.

Settings: 

-64 – +0 – +63

Resonance

This parameter’s function varies according to the selected Filter Type. If the selected filter is an LPF, 
HPF, BPF (excluding the BPFw), or BEF, this parameter is used to set the Resonance. If the selected 
filter is a BPFw, this parameter is used to adjust the frequency bandwidth. Resonance is used to set 
the amount of Resonance (harmonic emphasis) applied to the signal at the cutoff frequency. This 
can be used in combination with the cutoff frequency parameter to add further character to the 
sound. The Width parameter is used to adjust the width of the band of signal frequencies passed by 
the filter with the BPFw. The settings made here will be applied as offsets to the same parameters in 
the Filter display (page 68) of Voice Common Edit. This parameter can be changed directly via the 
Knob.

Settings: 

-64 – +0 – +63

5

 EG

FEG Attack

FEG Decay

FEG Release

FEG Depth

AEG Attack

AEG Decay

AEG Sustain

AEG Release

Determines the basic EG settings, both volume and filter, for the selected Part. The parameter 
values offset the same parameters of the assigned Element set in Voice Element Edit. For details 
about AEG/FEG, refer to the EG display (page 68) in Voice Common Edit. However in the case of the 
Drum Voices, only AEG Attack and AEG Decay are available. Each of the AEG parameters and FEG 
Depth can be changed directly via the Knob.

Settings: 

-64 – +0 – +63

6

 Part EQ

You can apply 3-band parametric EQ to each Part to adjust the sound. The parameter values here offset the same parameters of the 
assigned Element set in Voice Element Edit. The EQ shapes for Low and High are fixed as shelving types.

Freq

Determines the center frequency. Frequencies around this point are attenuated/boosted by the Gain 
setting below. Higher values produce higher frequencies. The Mid Freq parameter can be changed 
directly via the Knob.

Settings: 

Low........................ 50.1Hz – 2.00kHz
Mid ........................ 139.7Hz – 10.1kHz
High....................... 503.8Hz – 14.0kHz

Gain

Determines the level gain for the Frequency (set above), or the amount the selected frequency band 
is attenuated or boosted. This parameter can be changed directly via the Knob.

Settings: 

-12.00 dB – +0.00 dB – +12.00 dB

Summary of Contents for Motif-Rack XS























































































































Reviews:

No comments

Related manuals for Motif-Rack XS

Krown SLT100 Instruction Manual preview
SLT100
Brand: Krown Pages: 12
Monzana 105573 Instructions preview
105573
Brand: Monzana Pages: 5
Yamaha Clavinova CLP-340 Installation Procedure preview
Clavinova CLP-340
Brand: Yamaha Pages: 2
Yamaha Clavinova CLP-330 Midi Data Format preview
Clavinova CLP-330
Brand: Yamaha Pages: 7
Yamaha Clavinova CLP-100 Owner'S Manual preview
Clavinova CLP-100
Brand: Yamaha Pages: 11
Yamaha Clavinova CLP-350 Owner'S Manual preview
Clavinova CLP-350
Brand: Yamaha Pages: 19
Yamaha CE25 Owner'S Manual preview
CE25
Brand: Yamaha Pages: 11
Yamaha Clavinova CLP-250 Owner'S Manual preview
Clavinova CLP-250
Brand: Yamaha Pages: 17
Yamaha Clavinova CLP-760 Owner'S Manual preview
Clavinova CLP-760
Brand: Yamaha Pages: 27
Yamaha Clavinova CLP-380 Data List preview
Clavinova CLP-380
Brand: Yamaha Pages: 42
Yamaha Clavinova CLP-110 Owner'S Manual preview
Clavinova CLP-110
Brand: Yamaha Pages: 46
Yamaha Clavinova CLP-152 (Japanese) Owner'S Manual preview
Clavinova CLP-152
Brand: Yamaha Pages: 52
Yamaha Clavinova CLP-110 Service Manual preview
Clavinova CLP-110
Brand: Yamaha Pages: 57
Yamaha Clavinova CLP-156 (Japanese) Owner'S Manual preview
Clavinova CLP-156
Brand: Yamaha Pages: 68
Yamaha Clavinova CLP-430 Owner'S Manual preview
Clavinova CLP-430
Brand: Yamaha Pages: 96
Yamaha Clavinova CLP- 430 Owner'S Manual preview
Clavinova CLP- 430
Brand: Yamaha Pages: 96
Yamaha Clavinova CLP-306 (Spanish) Manual De Instrucciones preview
Clavinova CLP-306
Brand: Yamaha Pages: 108
Yamaha CLAVINOVA C L P - 3 8 Owner'S Manual preview
CLAVINOVA C L P - 3 8
Brand: Yamaha Pages: 136

Brands by name

Popular brands

Load more brands