Owner’s Manual
Effect Voice Effect Edit (for Drum Voice)
86
Voice Effect Edit (for Drum Voice)
Same as in Effect Edit for the Normal Voice. See page 85.
The only difference here is that “Key” and “InsEFOut” parameters appear in the Drum Voice Effect Connection Edit instead of
“EL1-4InsEFOut” (in the Normal Voice Effect Connection Edit).
Voice Effect Edit (for Plug-in Voice)
Same as in Effect Edit for the Normal Voice. See page 85.
The only difference here is that Element effect output settings are not available, and the parallel setting (Insertion Connection) is not
available in the Effect Connection Edit.
Performance Effect Edit
The Performance effect settings are common to all Parts.
For details about the effect connection in the Performance mode, see page 62. For details on the effect types, refer to the separate Data
List.
ChoToRev
Chorus to Reverb
Determines the Send level of the signal sent from the Chorus Effect to the Reverb Effect.
Settings:
0 ~ 127
ChoPan
Chorus Pan
Determines the pan position of the Chorus Effect sound.
Settings:
L63 (far left) ~ C (center) ~ R63 (far right)
ReverbType
Reverb Type
Sets the Reverb Effect type.
ReverbRtn
Reverb Return
Determines the Return level of the Reverb Effect.
Settings:
0 ~ 127
ReverbPan
Reverb Pan
Determines the pan position of the Reverb Effect sound.
Settings:
L63 (far left) ~ C (center) ~ R63 (far right)
Effect Parameter Edit
[VOICE]
→
select Normal Voice
→
press [EFFECT] once or twice
→
select each display with PAGE [
E
][
F
]
Ins1, Ins2 (Insertion Effect 1, 2)
From these displays you can set the detailed settings for the Insertion, Chorus, and Reverb Effects selected
in Effect Connection Edit above. For details on the parameters, refer to the separate Data List booklet.
Cho (Chorus)
Rev (Reverb)
Effect Connection Edit
[SHIFT]+[PERFORM]
→
select Performance
→
press [EFFECT] once or twice
VoiceEfPart1/2/3/4/
PLG1/PLG2
Insertion Switch
This display lets you set to which Parts the Insertion Effects are applied.
ChoCtgry/ChoType
Category/Type
Same functions as Effect Connection Edit in the Voice mode.
ChoRtn
Chorus Return
ChoToRev
Chorus to Reverb
ChoPan
Chorus Pan
ReverbType
Reverb Type
ReverbRtn
Reverb Return
ReverbPan
Reverb Pan
Effect Parameter Edit
[SHIFT]+[PERFORM]
→
select Performance
→
press [EFFECT] once or twice
→
select each display
with PAGE [
E
][
F
]
Cho (Chorus)
From these displays you can set the detailed settings for the Chorus/Reverb Effects selected in the Effect
Connection Edit above. For details on the parameters, refer to the separate Data List.
Rev (Reverb)
Utility
V
oice mode
P
erf
or
mance mode
Multi mode
Eff
ect
Ar
peggio
Ref
erence
