MONTAGE Supplementary Manual
41
Motion Control
Control Function
Switches among Performance Control, Part Control, and Element/Operator Control.
Settings:
Performance Control, Part Control, Elem/Op Control
NOTE
You can now store Control function operations as Performance data.
NOTE
Element/Operator Control can also be selected by simultaneously holding down the [SHIFT] button and using the [PART CONTROL]
buttons.
When “Element/Operator Control” is selected
The Number A [1] – [16], Number B [1] – [8], and the Number C [1] – [8] buttons function the same as when “Part Control” is
selected.
When “Element/Operator Control” is selected and the PART [COMMON] button is ON, the Control Sliders 1 – 8 control the levels
of the Elements/Operators of Part 1.
NOTE
Element/Operator Control is useful for playing Performances, for example, that contain single Organ Parts, because controlling the
volume of Elements in the Live Set display changes the harmonics of the Organ sound, just as with an actual organ.
Motion Control
Overview
Operation
[PERFORMANCE]
[Motion Control]
[Overview] or [SHIFT] + [PERFORMANCE]
Number buttons
PART [MUTE] button and
PART [SOLO] button are OFF
PART [MUTE] button ON
PART [SOLO] button ON
Number A [1] – [8] buttons
(upper line)
Part select (1 – 8)
Part mute (1 – 8)
Part select (1 – 8)
Number A [9] – [16] buttons
(lower line)
Part select (9 – 16)
Part mute (9 – 16)
Part solo (9 – 16)
Number B [1] – [8] buttons
Motion Sequencer for each Part ON/OFF (1 – 8 / 9 – 16)
Number C [1] – [8] buttons
Arpeggio for each Part ON/OFF (1 – 8 / 9 – 16)
Control Function
