MONTAGE Supplementary Manual
31
Motion Control
You can now make individual link setting of Assignable Knobs, to which functions commonly effective for all Parts are assigned,
with the Super Knob.
MS Master (Motion Sequencer Master Switch)
Turns the Motion Sequencer for the entire Performance on/off. This setting is applied to the [MOTION SEQ ON/OFF] button on
the panel.
Settings:
Off, On
Super Knob MS (Super Knob Motion Sequencer Switch)
Turns the Motion Sequencer applied to the Super Knob on/off.
Settings:
Off, On
Super Knob Link
Turns the link between the Assignable Knob and the Super Knob on/off. When this is set to off, the function value assigned to the
corresponding knob does not change even if the Super Knob is controlled.
Settings:
Off, On
Motion Control
Super Knob
Operation
[PERFORMANCE]
[Motion Control]
[Super Knob]
Motion Sequencer Master Switch
Super Knob Motion Sequencer Switch
Super Knob Link
