MODX Supplementary Manual
6
Control Assign dialog
In the dialog displayed when the Part parameter is selected and the [CONTROL ASSIGN] button is pressed, while pressing
[PART SELECT MUTE/SOLO], operating the Assignable Knob selects the Assignable Knob of Common.
While pressing the [PART SELECT MUTE/SOLO] button, operate the Knob you wish to use when operating the target parameter.
NOTE
An error message appears when you turn the Super Knob and there are no more Assignable Knobs or Control Assigns available for
assigning a Source.
Operation
Point the cursor to the control destination parameter of the Part
Press the [CONTROL ASSIGN] button.