V
oice mode
P
erf
ormance
mode
Song mode
Utility mode
File mode
Master mode
P
attern mode
Mixing V
oice
mode
Ref
erence
Pattern Job mode
201
Owner’s Manual
03: Clear Track
This Job deletes all data of the selected type from
the selected Pattern track.
The types of data to be cleared are the same as in
the Song Job mode. See page 188.
04: Normalize Play Effect
This Job rewrites the data in the selected track so that it incorporates the current Grid Groove settings.
After specifying a track (TR 01 – 16) to which this Job is applied, press the [ENTER] button to execute this Job.
05: Divide Drum Track
Separates the note events in a drum performance assigned to a specified track, and places the notes
corresponding to different drum instruments in separate tracks (tracks 1 through 8).
After specifying a track (TR 01 – 16) to which this Job is applied, press the [ENTER] button to execute this Job.
n
This job requires 8 empty User Phrases. If there aren't enough empty tracks, an error message appears. If this happens,
use the Clear Track Job (avobe) to delete some User Phrases, then try the Job again.
06: Put Track To Arp
This Job copies data in the specified measures of a section/track for creating Arpeggio data. For details, refer
to page 97 in the Quick Guide section.
[F6] PATTERN (Pattern Job)
01: Copy Pattern
This Job copies all data from a selected source
Pattern to a selected destination Pattern.
After specifying the source Pattern/section, and
the destination Pattern/section, as well as setting
the checkboxes as necessary, press the [ENTER]
button to execute this Job.
n
If you set the source section to “all,” the destination section is also set to “all” automatically. With this status, execute this Job to copy the entire source Pattern data
to the destination.
Preset Phrase
→
User
When this box is checkmarked, Preset Phrases (if included in the source Pattern) are copied to the User
Phrase, which will be assigned to the destination Pattern.
Duplicate User Phrase
When this box is checkmarked, User Phrases (if included in the source Pattern) are copied to another User
Phrase, which will be assigned to the destination Pattern. However, if the Pattern number of the source is same
as the number of destination, another User Phrase will be not created.
Chain
When this box is checkmarked, Pattern chain data (if included in the source Pattern) is copied to the
destination Pattern.
02: Append Pattern
Appends one Pattern to the end of another to
create one longer Pattern with all 16 tracks.
n
If the Pattern length becomes greater than 256
measures as a result of the Append Pattern Job, an
error message will be displayed and the Job will be
aborted.
Keep Original Phrase
When this box is checkmarked, the original destination Pattern data is retained in memory, along with the new
appended Pattern data. If the box is not checkmarked, the original destination Pattern is erased and replaced
with the newly created data.
n
When the KEEP ORIGINAL PHRASE checkbox is checked, this Job requires twice the number of empty user phrases as
the number of tracks containing data in which to store the appended phrase data. If the required space is unavailable,
an alert message will appear and the Job will be aborted. If this occurs use the Clear Phrase Job (page 200) to delete
unused phrases and try again.
03: Split Pattern
This Job splits a selected Pattern (all 16 tracks
data) into two Patterns. After the Split Pattern
operation, the part of the Pattern before the
specified Split Point will remain, and the part
following the Split Point will be moved to the
destination Pattern.
The Job overwrites any data already existing in
the destination Pattern.
Split Point
Determines the Split Point by setting a measure number.
Keep Original Phrase
When this box is checkmarked, the original Source Pattern data is retained in memory and the results of the
Split Job are written to empty phrases. When this box is not checkmarked, the original Source Pattern is erased
and replaced with the newly created data.
n
When the KEEP ORIGINAL PHRASE checkbox is checked, this Job requires twice the number of empty user phrases as the number of tracks containing data in
which to store the appended phrase data. If the required space is unavailable, an alert message will appear and the job will be aborted. If this occurs use the Clear
Phrase Job (page 200) to delete unused phrases and try again.
Section and track from which data is to be cleared
Types of data to be cleared
Source Pattern and section
Destination Pattern and section
Source Pattern
and section
Destination Pattern and section
Source Pattern and section
Destination Pattern
and section
CAUTION
Summary of Contents for MO6
Page 1: ...OWNER S MANUAL MUSIC PRODUCTION SYNTHESIZER EN...
Page 236: ...236 Owner s Manual Memo...
Page 237: ...237 Owner s Manual Memo...
Page 238: ...238 Owner s Manual Memo...
