Yamaha MO6, Owner'S Manual

Page: 193 / 240

Supplementary infomation
193
V
oice mode
P
erf
ormance
mode
Song mode
Utility mode
File mode
Master mode
P
attern mode
Mixing V
oice
mode
Ref
erence
Owner’s Manual
■
Supplementary information
Song Track Loop—setting example
In the example below, a 40-measure song has been recorded and
Track 1 is set to play back normally over the 40 measures. Track 2
has been set to loop, and will repeat until the [
J
] (Stop) button is
pressed.
When Track Loop has been set to on, you can specify the range to
be looped. (Only the end point can be set; the start point of looped
playback is fixed to the beginning of the song.)
Please note that changing the Track Loop from off to on will delete the
data of the area that is not looped.
1
Press [F1] to call up the Song Play display. Here,
change the change the current measure—this will be
used for the last measure of the loop.
2
Call up the [F3] TRACK
→
[SF3] TR LOOP display and
move the cursor to the track to be looped.
3
Set the selected track to on by using the [INC/YES] and
[DEC/NO] buttons or the data dial. (The display
prompts you for confirmation.)
4
Press the [INC/YES] button. The Loop is set to on and
the data after the loop end is deleted.
If you want to restore the deleted data and return the selected
track to off, press the [SF5] UNDO button.
The Undo function can only be used on the last Track Loop opera-
tion. If you’ve set other tracks to loop, the data of those previous
tracks cannot be recovered.
Step Recording — examples
This section explains how to step-record notes, using three
specific examples.
n
The explanations here using the Song mode display apply also to
the Pattern mode.
• Example 1
1
Set the parameters as illustrated below.
Press the Record button to call up the display below. Here,
we'll set the Step Time to (480) so that quarter notes will be
entered, and set the GateTime to 100% to have the notes play
in legato.
2
Play the keys C, D, E, F, G, A, B and C in order.
Each time you press a key and release it, the pointer moves
forward by one step and the played note is recorded.
3
Move the pointer to the top (beginning) of the song and
press the [
F
] (Play) button to hear the note data you
just recorded in steps 1 and 2.
[SONG]
➞
[F3] TRACK
➞
[SF3] TR LOOP (Track Loop) page 179
Playback
The four-measure data is repeated ten times
Track1
(40 measures of data)
Track2
(40 measures of data)
CAUTION
In this example, set to “004.”
CAUTION
[SONG] or [PATTERN]
➞
[REC]
➞
[F1] SETUP
➞
Type
= step
page 179
LOCATE
REC
1 2
SEQ TRANSPORT