Yamaha MO6, Owner'S Manual

Page: 125 / 240

Creating Your Original Program Set (Master mode)
125 Owner’s Manual
Quic
k Guide
Creating
Y
our Original Pr
ogram Set (Master mode)
Using Zones effectively with an external tone generator
The two examples below show how to use the Zones with both the internal tone generator and a connected external tone
generator. These instructions correspond to the steps on the previous page.
n
Though all four Zones are used in the example below, you can use any number of Zones (two, three, or four). The settings are made with the
MIDISwitch parameter ([MASTER]
→
[EDIT]
→
Zone selection
→
[F1] TRANS
→
MIDISwitch) and the TGSwitch parameter ([MASTER]
→
[EDIT]
→
Zone selection
→
[F1] TRANS
→
TGSwitch).
n
In these examples, the Zones are assigned to different areas of the keyboard. However, two or more Zones can also be assigned to the same area in a
layer, from the NOTE display ([MASTER]
→
[EDIT]
→
Zone selection
→
[F2] NOTE).
■
Master settings with the Voice mode/Performance mode (Single-timbre tone generator mode)
■
Master settings with the Song mode/Pattern mode (Multi-timbral tone generator mode)
For each Zone, set whether or not MIDI data is transmitted
to the external instrument.
Determine the MIDI Transmit Channel for each zone.
[MASTER]
→
[EDIT]
→
Zone selection
→
[F1] TRANS
→
TransCh
For each Zone, set whether or not MIDI data is transmitted
to each Part of the internal tone generator.
[MASTER]
→
[EDIT]
→
Zone selection
→
[F1] TRANS
→
TGSwitch
Determine the note range of each zone.
[MASTER]
→
[EDIT]
→
Zone selection
→
[F2] NOTE
→
NoteLimitH
[MASTER]
→
[EDIT]
→
Zone selection
→
[F2] NOTE
→
NoteLimitL
[MASTER]
→
[EDIT]
→
Zone selection
→
[F1] TRANS
→
MIDISwitch
Internal tone generator (Single Timbre)
External tone generator (Multi-timbral)
Set the MIDI receive channel for each part.
MIDI Transmit
Channel 1 MIDI Transmit
Channel 2 MIDI Transmit
Channel 3 MIDI Transmit
Channel 4
[UTILITY]
→
[F5] MIDI
→
[SF1] CH
→
BasicRcvCh = 01
For each Zone, set whether or not MIDI data is transmitted
to the external instrument.
Determine the MIDI Transmit Channel for each zone.
[MASTER]
→
[EDIT]
→
Zone selection
→
[F1] TRANS
→
TransCh
For each Zone, set whether or not MIDI data is transmitted
to each Part of the internal tone generator.
[MASTER]
→
[EDIT]
→
Zone selection
→
[F1] TRANS
→
TGSwitch
Determine the note range of each zone.
[MASTER]
→
[EDIT]
→
Zone selection
→
[F2] NOTE
→
NoteLimitH
[MASTER]
→
[EDIT]
→
Zone selection
→
[F2] NOTE
→
NoteLimitL
[MASTER]
→
[EDIT]
→
Zone selection
→
[F1] TRANS
→
MIDISwitch
Internal tone generator (Multi-timbral)
External tone generator (Multi-timbral)
Set the MIDI receive channel for each part.
MIDI Transmit
Channel 1
Part 05
Receive
Channel 1 Part 13
Receive
Channel 2
MIDI Transmit
Channel 2 MIDI Transmit
Channel 3 MIDI Transmit
Channel 4
[SONG]
→
[MIXING]
→
[EDIT]
→
Part selection
→
[F1]VOICE
→
[SF2]MODE
→
ReceiveCh