Yamaha MO6, Owner'S Manual

Page: 102 / 240

Quic
k Guide
Creating a Song on the MO
Creating a Song
102 Owner’s Manual
Setting a specific file to load automatically when the power is turned on
The MO is very easy to use and you can create Voices, Performances, Patterns and Songs very quickly on it. However, there may
be times that creating and editing of data may be spread out over several sessions. In such a case, you may find it convenient to
have the instrument automatically load the appropriate files for you when you turn it on, so you can easily resume your editing
session.
n
The Auto Load parameter is set to on when this synthesizer is shipped from the factory.
n
The file type which can be loaded automatically is “All.”
1
Change the names of the files you wish to have
load automatically when the power is turned on
as described below, and save them together in a
single folder or in the root directory.
2
Enter the Utility mode and call up the Auto Load
display ([UTILITY]
➞
[F1] GENERAL
➞
[SF4]
OTHER).
3
Set “Auto Load” to on, and press the [SF5] GET
button.
4
Select the folder saved in step 1.
If the device is inserted the multiple medias, select the Slot
number. If the device is divided the multiple partitions,
select the Partition number.
5
Press the [STORE] button to store the settings
as the system setting of Utility mode.
n
If the Auto Load files cannot be found (for example, a USB
storage device is not installed properly or a USB storage
device containing no Auto Load files is installed, etc.) when
turning the power on even with the Auto Load parameter set to
on, the Demo Song/Pattern data n the internal ROM will be
loaded automatically.
TIP
Save the data after editing. The saved files are loaded automatically
when you turn the power on next time. Turn the power off
Save
Auto Load
USB Storage device USB Storage device
File type File name
All AUTOLOAD.M7A