manualshive.com logo in svg

Yamaha mLAN Driver, Owner'S Manual, Page: 18 / 43

Share
Download
Yamaha mLAN Driver Owner'S Manual Download Page 18

18

Viewing Node Information

In Graphic view, you can display and change detailed node information by clicking the node icons 
(page 13) for the computer and mLAN devices, or selecting a node and then selecting [Node 
Information] from the [View] menu. The Node Information (Audio) window opens from the Audio or 
Wordclock Connection windows, and the Node Information (MIDI) window opens from the MIDI 
Connection window.

■

Vendor

Indicates the manufacturer of the node device.

■

Model Name

Indicates the model of the node device.

■

Model Nickname

Indicates and enables you to change the node nickname. You can assign any nickname (up to 32 
characters) to help identify the node. You cannot use two-byte characters (such as Japanese or 
Chinese characters).

■

GUID

Indicates a unique ID for mLAN device nodes. If two nodes are mLAN devices of the same model, 
the IDs are different for each device.
If the node represents a computer, this field indicates the ID for the IEEE1394 card.

Node Information (Audio) window

Summary of Contents for mLAN Driver












































Reviews:

No comments