mLAN Driver/mLAN Tools Installation Guide
20
When connecting the MY16-mLAN
3
On mLAN Auto Connector, set up the word-
clock and specify the number of audio chan-
nels (see below).
q
Nickname
This field indicates the nickname of the connected MY16-
mLAN. To change the nickname, refer to “Node Informa-
tion” in the mLAN Graphic Patchbay Manual.
w
Model Name
This parameter enables you to select an mLAN device to
which you wish to make an mLAN connection in a multiple
mLAN device network.
e
[Update] button
Clicking this button updates the information on the mLAN
devices connected to the mLAN network. Use this button
when you add an mLAN device to the network while mLAN
Auto Connector is running.
r
[Identify] button
Clicking this button causes the MY16-mLAN ACTIVE indi-
cator to flash for a few seconds.
t
Sample Rate
This parameter enables you to specify the sampling fre-
quency (wordclock frequency).
y
Wordclock Master radio buttons
These buttons enable you to specify the computer or MY16-
mLAN as the wordclock master.
u
PC
→
MY16-mLAN
This parameter enables you to specify the channels of audio
data routed from the computer’s audio output (mLAN
driver’s audio output) into the MY16-mLAN.
i
PC
←
MY16-mLAN
This parameter enables you to specify the channels of audio
data routed from the MY16-mLAN’s output into the com-
puter’s input.
o
[Connect] button
Click this button to connect the MY16-mLAN to the com-
puter via mLAN. When the connection is completed, the
mLAN Auto Connector window will close automatically.
!0
[Cancel] button
Click this button to cancel the settings and close mLAN Auto
Connector.
!1
[Setup] button
Click this button to open the mLAN16E Control Panel win-
dow, which enables you to set the wordclock transition speed.
4
Click [Connect]. If the connections have
been made properly, the mLAN Auto Con-
nector completes operation and the mLAN
data communication starts.
NOTE
• If for some reason connection fails, right- click the mLAN Driver
icon in the task bar to restart the mLAN Auto Connector and click
[Connect] again. You need not restart your computer.
q
w
e
r
t
y
u
i
o
!0
!1
