mLAN Driver/mLAN Tools Installation Guide
11
Installing mLAN Applications for
Yamaha
After the installation of mLAN Tools 2.0 is complete, the first
screen in the procedure to install mLAN Applications for
Yamaha appears.
17
Click [Next].
The “Choose Destination Location” window appears.
18
Set the destination drive and folder name
for installing mLAN Applications for
Yamaha.
The destination directory is automatically set; however,
if you wish to change it, click the [Browse] button and
select the desired folder (drive:\folder name).
NOTE
• In general, there is no need to change the destination direc-
tory.
19
Confirm the drive and folder name and click
[Next] to start installation.
20
When the installation is complete, a message
indicating that installation is complete
appears.
Make sure that the radio button to the left of
“Yes, I want to restart my computer now” Is
selected, then click [Finish] to restart the com-
puter.
NOTE
• If the “Windows Security” window appears, confirm that
the publisher is “YAMAHA CORPORATION,” then click
[Install].
mLAN Driver initial settings
After you restart the computer, complete the mLAN Driver
initial settings.
21
A dialog box in the upper left corner of the
screen prompts you to turn on the power to
the device. Connect the mLAN device to the
computer, then turn on the power to the
device.
22
Click [OK] in the same dialog box (that
prompted you to turn on the power to the
device) indicated in Step
21
.
23
The following message appears in the upper
left corner of the screen: “The driver initializa-
tion will be executed.”
Click [OK].
NOTE
• If the “User Account Control” window appears, click [Con-
tinue].
24
Initial setup of mLAN Driver is automatically
started. Wait until the initial setup is com-
pleted. During this process, a window indicat-
ing the current status is shown at the upper
left corner of the screen.
When canceling the installation
If you’ve cancelled an installation before it is complete,
the software may not have been installed properly. To
install the software properly, resume the procedure from
Step
10
.
