manualshive.com logo in svg

Yamaha MIXING CONSOLE, Owner'S Manual

Share
Download
Yamaha MIXING CONSOLE Owner'S Manual Download Page 221

Controlling Parameters by Using Parameter Changes

221

01V96—Owner’s Manual

MIDI

18

Controlling Parameters by Using Parameter Changes

You can control 01V96 parameters in real time by using Parameter Change messages that 
are System Exclusive messages, instead of using MIDI Control Changes.

See “MIDI Data Format” at the end of this Manual for detailed information on available 
Parameter Changes.

1 Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly until the 

DIO/Setup | MIDI/Host page appears, then specify ports for transmission 
and reception of MIDI messages (see page 212).

2 Make connections using the ports selected in Step 1 so that the 01V96 can 

transmit and receive MIDI messages to and from the external device.

3 Press the DISPLAY ACCESS [MIDI] button, then press the [F1] button to dis-

play the MIDI | Setup page, then turn off the Tx and Rx ON/OFF buttons in 
the PARAMETER CHANGE row.

The 01V96 will now set certain parameter values when it receives corresponding Parameter 
Changes. Also, when you adjust certain parameters on the 01V96, it transmits correspond-
ing Parameter Changes.

Note:  

You do not have to specify MIDI Channels to control parameters using Parameter 

Changes. Make sure that both Tx and Rx ON/OFF buttons in the CONTROL CHANGE row 
are turned off.

Summary of Contents for MIXING CONSOLE















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands