Yamaha Mio Amore AL115 Page 56 Owner'S Manual Download | Manualshive

Page: 56 / 76

background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-23

7

EAU23111

Checking and lubricating the
throttle grip and cable

The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated at
the intervals specified in the periodic
maintenance chart.

EAU23172

Lubricating the front and rear
brake levers

The pivoting points of the front and rear
brake levers must be lubricated at the
intervals specified in the periodic main-
tenance and lubrication chart.

EAU23213

Checking and lubricating the
centerstand and sidestand

The operation of the centerstand and
sidestand should be checked before
each ride, and the pivots and metal-to-
metal contact surfaces should be lubri-
cated if necessary.

EWA10741

WARNING

If the centerstand or sidestand does
not move up and down smoothly,
have a Yamaha dealer check or re-
pair it. Otherwise, the centerstand or
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.

Recommended lubricant:

Silicone grease

Recommended lubricant:

Lithium-soap-based grease

«
...
54
55
56
57
58
...
»

Summary of Contents for Mio Amore AL115













































































Reviews:

No comments

Related manuals for Mio Amore AL115

Brand: N-Com Pages: 2

Brand: N-Com Pages: 64

COMFORT 10130810

Brand: Contracor Pages: 36

Brand: CF MOTO Pages: 443

Brand: R&G Pages: 3

Brand: Takegawa Pages: 2

Bonneville T100

Brand: Triumph Pages: 198

2016 Empulse TT

Brand: Victory Motorcycles Pages: 138

690 Enduro AUS 2010

Brand: KTM Pages: 265

TorqDrive Clutch Pack

Brand: Rekluse Pages: 18

Brand: KC Pages: 32

Brand: Yamaha Pages: 74

Brand: Yamaha Pages: 76

Brand: Yamaha Pages: 72

Brand: Yamaha Pages: 78

Brand: Yamaha Pages: 76

Brand: Yamaha Pages: 90

Brand: Yamaha Pages: 164

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands