Yamaha Mio Amore AL115 Page 28 Owner'S Manual Download

Page: 28 / 76

OPERATION AND IMPORTANT RIDING POINTS

6-2

4. After starting the engine, move the

starter (choke) back halfway.

NO-

TICE:

For maximum engine life,

always warm the engine up be-
fore starting off. Never acceler-
ate hard when the engine is
cold!

[ECA11131]

5. When the engine is warm, turn the

starter (choke) off.

EAU16640

Starting a warm engine

Follow the same procedure as for start-
ing a cold engine with the exception
that the starter (choke) is not required
when the engine is warm.

EAU16761

Starting off

TIP

Before starting off, allow the engine to
warm up.

1. While pulling the rear brake lever

with your left hand and holding the
grab bar with your right hand, push
the scooter off the centerstand.

2. Sit astride the seat, and then ad-

just the rear view mirrors.

3. Switch the turn signals on.
4. Check for oncoming traffic, and

then slowly turn the throttle grip
(on the right) in order to take off.

5. Switch the turn signals off.

Summary of Contents for Mio Amore AL115













































































Search results

Summary of Contents for Mio Amore AL115

Reviews:

Related manuals for Mio Amore AL115

Brands by name

Popular brands

Yamaha Mio Amore AL115, Owner'S Manual

Search results

Summary of Contents for Mio Amore AL115

Reviews:

Related manuals for Mio Amore AL115

Brands by name

Popular brands