Yamaha Mio Amore AL115 Page 20 Owner'S Manual Download

Page: 20 / 76

INSTRUMENT AND CONTROL FUNCTIONS

4-4

EAU37471

Fuel tank cap

To remove the fuel tank cap

1. Open the seat. (See page 4-7.)
2. Turn the fuel tank cap counter-

clockwise and pull it off.

To install the fuel tank cap

1. Insert the fuel tank cap into the

tank opening and turn it clockwise
until the “

” marks on the cap

and tank are aligned.

2. Close the seat.

EWA11091

WARNING

Make sure that the fuel tank cap is
properly closed after filling fuel.
Leaking fuel is a fire hazard.

EAU13212

Fuel

Make sure there is sufficient gasoline in
the tank.

EWA10881

WARNING

Gasoline and gasoline vapors are
extremely flammable. To avoid fires
and explosions and to reduce the
risk of injury when refueling, follow
these instructions.

1. Fuel tank cap

a. Open.

b. Close.

1. Fuel tank filler tube

2. Fuel level

Summary of Contents for Mio Amore AL115













































































Search results

Summary of Contents for Mio Amore AL115

Reviews:

Related manuals for Mio Amore AL115

Brands by name

Popular brands

Yamaha Mio Amore AL115, Owner'S Manual

Search results

Summary of Contents for Mio Amore AL115

Reviews:

Related manuals for Mio Amore AL115

Brands by name

Popular brands