MCX-2000 Owner’s Manual
72
4
When the image file is created, the MCX-2000 shows the
following dialog box. To continue the process, open the
tray and set a CD-R/RW disc for audio recording with
“Change disc and proceed with recording” selected.
Select OK in the dialog box.
5
If you set a CD other than one specified, the MCX-2000
prompts you to set a blank disc. In addition, you cannot
record onto a CD-R disc that’s already been recorded.
If you set a CD-RW disc that’s already been recorded, the
MCX-2000 shows the following dialog box, asking your
answer.
Initialize Disc and proceed with recording
Quick Mode:
Select this to quickly erase the current disc
content and continue the process.
Normal Mode:
Select this to completely erase the
current disc content (which could take a long time) and
continue the process.
Change Disc:
Select this if you want to replace the disc
with a blank CD-R/RW disc.
Cancel CD duplication:
Select this to cancel the process.
Change discs if necessary, using the OPEN/CLOSE button
on the remote control for tray operations.
6
When the MCX-2000 detects an appropriate blank disc, it
automatically starts writing the image file on that disc.
.
7
When the CD duplication process is finished, the
MCX-2000 shows the following dialog box, asking what
you want to do next.
Open CD screen:
Select this to finish the process, and
open the CD song list screen (page 52) to confirm a list of
songs on the duplicated CD.
Create another CD-R/RW:
Select this if you want to
duplicate another music CD. The MCX-2000 automatically
opens the tray and lets you repeat the above procedure from
step 2.
Exit this screen:
Select this to finish the process.
n
When you cancel or finish the process, the original disc image file is
automatically erased.
