11
En
O
PERAT
IO
N
Engl
ish
The setup menu appears on the front panel display by pressing
SETUP
. You can set various useful functions with setup
menu.
*
1
When there are some parameters to set, repeat steps 3 and 4. You can go back to a previous parameter by pressing
.
*
2
To set additional items, repeat steps 2 to 5.
y
To cancel the setting during the operation, press
SETUP
.
■
Setting dimmer, tone/balance and power saving mode
DIMMER: Changes the brightness of the front panel display.
TREBLE*
3
: Adjusts the high frequency response.
BASS*
3
: Adjusts the low frequency response.
BALANCE: Adjusts the volume level of each left and right speaker channel.
POWER SAVING: If you set to ECO, you can reduce standby power consumption. However, you cannot turn on the
unit by playback operation on your iPod during standby mode. The default setting is NORMAL. This function is
available only for MCR-140.
WIRELESS SW: Set to YES when you use a subwoofer via the wireless subwoofer kit (SWK-W10, etc., sold
separately). The default setting is NO. This function is available only for MCR-140.
*
3
Also effective when you are using headphones.
USING USEFUL FUNCTIONS
Using setup menu
Setup menu
Parameter or control range
Reference page
PRESET DELETE
(Displays only when the input source is set to FM.)
DIMMER
DIMMER ON (25%)/OFF (100%)
below
TREBLE
–6 dB to +6 dB
below
BASS
–6 dB to +6 dB
below
BALANCE
L+5 - CENTER - R+5
below
CLOCK SET
Hour, minute
TIMER SET
Time (hour, minute), running time, sound (source, track or preset
number), timer on/off
WIRELESS SET
GROUP A1/A2/A3/B1/B2/B3
POWER SAVING
NORMAL/ECO
below
WIRELESS SW
NO/YES
below
MCR-140
MCR-140
MCR-140
Press SETUP.
Select desired
setup menu.
Confirm with
ENTER.
Change the settings.
Complete the
setting.
*
2
1
2
3
4
5
Repeat
*
1
Exit setup
menu.
6
