![background image](http://html2.mh-extra.com/html/yamaha/loopfactory-an200/loopfactory-an200_manual_3217778069.webp)
69
Setup Menus /
AN200 Display Option
This convenient feature lets you change the display of the main control panel to indicate
the current status of certain signal routings within the AN200. When one of the options
is enabled (a check mark appears), color-coded highlights, arrows and lines appear to
show how the relevant blocks and parameters affect each other. Any or all of the three
options below can be enabled.
• Main Signal Flow
When this is checked, the signal flow of the main blocks (e.g., VCO blocks into MIXER,
MIXER into VCF, etc.) is shown.
• Relation of Osc. Sync.
When this is checked, the master/slave relationship of the
shown.
• Relation of FM
When this is checked, the modulation routing of the
is shown.
• Although the AN200 Display Option can also be selected from the
, you may
want to use this slightly quicker, more convenient way of changing the display: Open the
AN200 Display Option box in the conventional way (from the Setup menu), and drag the box to
an open space on the screen. Then, when you want to change the setting, simply move the
cursor to the box and click --- the display changes instantly to your preference.
AN200 Display Option