![background image](http://html2.mh-extra.com/html/yamaha/loopfactory-an200/loopfactory-an200_manual_3217778061.webp)
61
File Menus /
Open AN200 File
Use this function to open an existing AN200 File.
• The available file types include:
AN200 Data file (*.AN2)
User patterns created with the AN200 Editor.
AN Expert Data file (*.ANS)
User voices and user sequencer patterns created with the AN Expert Editor.
AN1x Editor*** Data file (*.AN1)
User voices and user sequencer patterns created on the AN1x Control Synthesizer.
*** AN1x Editor
• These are data files of the AN1x Editor software, which was previously available as freeware
on CD-ROM and floppy disk when the AN1x was first sold. It is currently available at the
Yamaha website (http://www.yamaha.co.uk).
• Files created with the Macintosh version of the AN1x Editor can be opened here if the exten-
sion ".AN1" is added to the end of the file name.
• "Open AN200 File" can also be selected from the
• Keep in mind that this operation loads the User Pattern only into the User pattern memory of
the AN200 Editor. After opening a file, if you want to play with these Patterns separate from
the AN200 Editor, you should transmit the User Pattern. (Refer to
.) There is no need to transmit AN200 Bulk Dump Data if you select a pattern in the Pat-
tern List of the AN200 Editor, since the current pattern bulk data is sent with that operation.
Open AN200 File
Selects the desired folder.
Selects the desired file name.
Selects the desired file type.