manualshive.com logo in svg

Yamaha L2, Command Reference Manual

The Yamaha L2 Command Reference Manual is a comprehensive guide that provides detailed instructions and information about the product. This essential manual is available for free download on our website, manualshive.com, allowing users to access it easily and conveniently. Gain complete control and maximize the potential of your Yamaha L2 with this indispensable resource.

Share
Download
background image

 port1.26         -            -            -            -            -

 port1.27    3.34         3.89         3.70         2.89         2.70

 port1.28    Unsupported  Unsupported  Unsupported  Unsupported  Unsupported

             Current      High Alarm   High Warning Low Warning  Low Alarm

Interface    (mA)         Threshold    Threshold    Threshold    Threshold

------------ ------------ ------------ ------------ ------------ ------------

 port1.25      4.0         16.0         15.0          2.0          2.0

 port1.26         -            -            -            -            -

 port1.27      6.2         17.0         14.0          2.0          1.0

 port1.28    Unsupported  Unsupported  Unsupported  Unsupported  Unsupported

             TX-Power     High Alarm   High Warning Low Warning  Low Alarm

Interface    (dBm)        Threshold    Threshold    Threshold    Threshold

------------ ------------ ------------ ------------ ------------ ------------

 port1.25     -5.4806       0.4139       0.0000     -10.7058     -12.2184

 port1.26         -            -            -            -            -

 port1.27     -5.4714      -1.9997      -1.9997     -11.0237     -11.7392

 port1.28    Unsupported  Unsupported  Unsupported  Unsupported  Unsupported

             RX-Power     High Alarm   High Warning Low Warning  Low Alarm

Interface    (dBm)        Threshold    Threshold    Threshold    Threshold

------------ ------------ ------------ ------------ ------------ ------------

 port1.25     -7.5696       2.5527       0.0000     -16.9897     -40.0000

 port1.26         -            -            -            -            -

 port1.27     -8.7614       1.0002      -1.0017     -18.0134     -20.0000

 port1.28    Unsupported  Unsupported  Unsupported  Unsupported  Unsupported

5.1.16 Set SFP module optical reception level monitoring

[Syntax]

sfp-monitor

 

rx-power

 

action

no

 

sfp-monitor

 

rx-power

[Parameter]

action

:

Operations for SFP module optical reception level monitoring

Setting value

Description

enable

Enables SFP module optical reception level
monitoring

disable

Disables SFP module optical reception level
monitoring

[Initial value]

sfp-monitor rx-power enable

[Input mode]

global configuration mode

[Description]

Sets the monitoring of SFP module optical reception levels.

[Example]

Disable SFP module optical reception level monitoring.

SWR2311P(config)#sfp-monitor rx-power disable

5.2 Link aggregation

5.2.1 Set static logical interface

[Syntax]

static-channel-group

 

link-id

no

 

static-channel-group

Command Reference | Interface control | 

123

Summary of Contents for L2











































































































































































































































































Reviews:

No comments

Related manuals for L2

Ubiquiti ES-24-250W Quick Start Manual preview
ES-24-250W
Brand: Ubiquiti Pages: 24
Ubiquiti USW-24 User Manual preview
USW-24
Brand: Ubiquiti Pages: 13
Ubisys ZIGBEE S2(-R) Quick Start Manual preview
ZIGBEE S2(-R)
Brand: Ubisys Pages: 2
6TL YAV904X8 Manual preview
YAV904X8
Brand: 6TL Pages: 25
Panio HW2250K User Manual preview
HW2250K
Brand: Panio Pages: 5
FS IES3110-8TF Quick Start Manual preview
IES3110-8TF
Brand: FS Pages: 33
Icy Box IB-HUB1426-U3 Quick Installation Manual preview
IB-HUB1426-U3
Brand: Icy Box Pages: 10
hager HIB4 M Series Installation preview
HIB4 M Series
Brand: hager Pages: 3
H-Tronic TS 1000 Instruction Manual preview
TS 1000
Brand: H-Tronic Pages: 15
Velleman VAS4 User Manual preview
VAS4
Brand: Velleman Pages: 8
Hama 42556 Operating Instructions Manual preview
42556
Brand: Hama Pages: 36
Emos 3402114000 Manual preview
3402114000
Brand: Emos Pages: 44
Copal 102R Instruction Manual preview
102R
Brand: Copal Pages: 9
Targus ACH129 User Manual preview
ACH129
Brand: Targus Pages: 30
Tripp Lite B005-DPUA4 Owner'S Manual preview
B005-DPUA4
Brand: Tripp Lite Pages: 12
Imagine Neo NSM-7x2AES Installation And Operation Manual preview
Neo NSM-7x2AES
Brand: Imagine Pages: 93
Owon SLC600-D Quick Start Manual preview
SLC600-D
Brand: Owon Pages: 10
H3C S9825 Series Manual preview
S9825 Series
Brand: H3C Pages: 34

Brands by name

Popular brands

Load more brands