Yamaha L2 SWX2320-16MT, User Manual

Page: 9 / 40

2.3. Rear panel
⑬
⑭
⑪
⑫
⑪ Cooling vents
These holes are used to force out the hot air generated inside the product, using the fan.

Warning
• Do not block or place objects near the fan outlet.
Doing so could cause fire or malfunctions.
⑫ Serial number
The same indication is shown on the product nameplate.
⑬ Power cord clamp attachment holes
The included power cord clamp (C-shaped) can be attached here. For details on installation, refer
to “
Connecting the power cord ” in “Connections.”
⑭ Power supply inlet (three-prong connector, C14 type)
Insert the included power supply cord here.
2.4. Side panel
⑮
⑯
⑮ 19-inch rack mount hardware attachment holes
These are used when installing this product in a 19-inch rack (1U). For details on installation,
refer to “
Installing in a 19-inch rack ” in “Installation.”
⑯ Cooling vents
These holes are used when drawing in outside air with the fan to cool the product.

Warning
• Do not block the cooling vents or place objects near them.
Doing so could cause fire or malfunctions.
2. Controls and connectors
L2 SWITCH SWX2320-16MT User Guide | 7