2.7. Switching through port indicator display modes
When an error occurs, the product switches to STATUS mode; and after the product is restored from
error status, the product returns to default LED mode automatically. The product switches to STATUS
mode automatically. You cannot switch manually to STATUS mode.
See the tables below for how modes are switched.
For default LED mode: LINK/ACT mode
Mode name
Switching conditions
Explanation
LINK/ACT
Normal
Displays the link status using the left indicators
on the LAN/SFP+ ports, and the connection speed
on the right indicators.
↑ ↓
STATUS
Error occurred (automatic
switching to LINK/ACT mode to
restore)
Displays the LAN/SFP+ port error status.
For default LED mode: OFF mode
Mode name
Switching conditions
Explanation
OFF
Normal
The indicators on the LAN/SFP+ ports and the
stack ID display indicator goes dark.
↑ ↓
STATUS
Error occurred (automatic
switching to OFF mode to
restore)
Displays the LAN/SFP+ port error status.
Memo
• The factory default default LED mode is set to LINK/ACT mode.
• Use the “show led-mode” command to check the default LED mode and the
display mode that is currently displayed.
2. Controls and connectors
L2 SWITCH SWX2320-16MT User Guide |
11
