manualshive.com logo in svg

Yamaha KODIAK 700 2018, Owner'S Manual, Page: 50 / 180

Share
Download
Yamaha KODIAK 700 2018 Owner'S Manual Download Page 50

4-19

4

EBU18325

Speed limiter

The speed limiter keeps the throttle from fully
opening, even when the throttle lever is pushed to
the maximum.

Adjusting the speed limiter

1. Loosen the locknut.
2. To increase the maximum engine power

available and the maximum speed of the ATV,
turn the adjusting screw in direction (a). To
decrease the maximum engine power avail-
able and the maximum speed of the ATV, turn

the adjusting screw in direction (b). Do not
turn the adjusting screw out more than 12
mm (0.47 in) or the throttle cable could be
damaged. Always make sure the throttle lever
free play is adjusted to 3.0–5.0 mm (0.12–
0.20 in). (See page 8-41.) 

WARNING! Im-

proper adjustment of the speed limiter and
throttle could cause throttle cable damage
or improper throttle operation. You could
lose control, resulting in an accident.

[EWB00242]

3. Tighten the locknut.

EBU18393

Front brake lever

1. Locknut
2. Adjusting screw
3. No more than 12 mm (0.47 in)

2

1

3

(b)

(a)

1. Front brake lever

UB5K60E0.book  Page 19  Monday, May 28, 2018  11:35 AM

Summary of Contents for KODIAK 700 2018





















































































































































































Reviews:

No comments