background image

5-13

5

YFM700FWBD / YFM70KPAL

EBU18081

Engine stop switch “

/

Set this switch to “

” before starting the engine.

The engine stop switch controls the ignition and
stops the engine when it is running. Use this
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to “

”.

EBU18102

Start switch “

Push this switch to crank the engine with the start-
er. See the starting instructions on page 7-1 prior
to starting the engine.

EBU34123

Light switch “

/

/OFF”

Set this switch to “

” to turn on the left and right

headlights (low beams) and the taillight. Set the
switch to “

” to turn on the left and right head-

lights (high beams), the handlebar-mounted light
(YFM700FWBD / YFM70KPAL), and the taillight.
Set the switch to “OFF” to turn off all the lights.

NOTICE

ECB00046

Do not use the headlights with the engine
turned off for an extended period of time. The
battery may discharge to the point that the
starter will not have enough power to crank the
engine. If this should happen, remove the bat-
tery and recharge it. (See page 9-53.
)

 

EBU18171

Horn switch “

Press the switch to sound the horn.

1. On-Command drive switch “2WD/4WD”
2. On-Command drive switch “4WD/LOCK”
3. Drive switch lock lever

2WD

4WD

LOCK

4WD

3

3

2

1

UB5K62E0.book  Page 13  Thursday, May 9, 2019  2:59 PM

Summary of Contents for KODIAK 2019



















































































































































































Reviews: