89
En
MANUAL SETUP
AD
V
ANC
ED
OPERA
T
ION
English
■
OSD SET (OSD settings)
Use to adjust the display position and to set the display
time of the OSD.
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust
toward the – (minus) direction to raise the position of the
OSD, and adjust toward the + (plus) direction to lower it.
Choices: –5 to +5
Initial setting: 0
OSD DISPLAY TIME (OSD display time)
(U.S.A., Canada, and Australia models only)
Use to set the interval for which the OSD screen is
displayed after an operation.
Choices:
ON
, 10s, 30s
• Select ON to show the OSD screen constantly.
• Select 10s to turn off the OSD screen 10 seconds after
an operation.
• Select 30s to turn off the OSD screen 30 seconds after
an operation.
y
The OSD display time setting is available for your iPod and XM
Satellite Radio (U.S.A. and Canada models only). For details, see
pages 4 and 10 in the Reference Guide.
■
UNIT SET (Unit settings)
Use this to change the display unit of measurement.
Choices:
METERS
(Australia, Europe, Asia, and Korea
models),
FEET
(U.S.A. and Canada models)
• Select METERS to enter distances in meters.
• Select FEET to enter distances in feet.
If you change this setting, the adjusted sound beam settings may
change.
Note
OSD SHIFT
;;;;;;;;;;
0
OSD DISPLAY TIME
;;;
ON
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
B)OSD SET
p
p
.
p
p
METERS
FEET
[ ]/[ ]:Select
[ENTER]:Return
p
p
C)UNIT SET
p