Yamaha HTR-N5060 Owner'S Manual Download Page 35

Page: 35 / 124

PLAYBACK

OPE

English

Rotate VOLUME on the front panel (or press
/– on the remote control) to adjust
the volume to the desired output level.

Press TONE CONTROL on the front panel
repeatedly to select “TREBLE” or “BASS”
and then press BASS//– repeatedly
to adjust the corresponding frequency
response level.

• Select “TREBLE” to adjust the high-frequency

response.

• Select “BASS” to adjust the low-frequency

response.

• Speaker and headphone adjustments are stored

independently.

• When “TONE BYPASS” is set to “AUTO” (see page 73),

and “BASS” and “TREBLE” are set to 0 dB, audio output
automatically bypasses the tone control circuitry of this
unit.

• If you increase or decrease the high-frequency or low-

frequency sound to an extreme level, the tonal quality of
the front speakers may not match that of the other
speakers.

• TONE CONTROL is not effective when the “DIRECT

STEREO” mode (see page 39) is selected or when the
component connected to the MULTI CH INPUT jacks is
selected as the input source (see page 38).

Press PROGRAM

on the front panel (or

press one of the sound field program
selector buttons on the remote control)
repeatedly to select the desired sound field
program.

The name of the selected sound field program appears
in the front panel display and in the OSD.
See page 58 for details about sound field programs.

• Choose a sound field program based on your listening

preference, not merely on the name of the program.

• When you select an input source, this unit automatically

selects the last sound field program used with the
corresponding input source.

• Sound field programs cannot be selected when the

component connected to the MULTI CH INPUT jacks is
selected as the input source (see page 38).

• Sampling frequencies higher than 48 kHz (except for DTS

96/24 signals) are sampled down to 48 kHz and then sound
field programs are applied.

• To display information about the currently selected input

source in the OSD, see page 40 for details.

Notes

VOLUME

Remote control

Front panel

TONE CONTROL

PROGRAM

DVR

DVD

V-AUX

DTV/CBL

MD/CD-R

TUNER

NET
USB

VOLUME

T R E B L E

0 d B

Notes

PROGRAM

STEREO

EFFECT

STANDARD

SPEAKERS

MUSIC

SELECT

ENHANCER

ENTERTAIN

EXTD SUR.

NIGHT

MOVIE

DIRECT ST.

STRAIGHT

ENT.

Front panel

Remote control

DVR

DVD

V-AUX

DTV/CBL

MD/CD-R

TUNER

NET
USB

VOLUME

T V S p o r t s

Currently selected

sound field program

Summary of Contents for HTR-N5060





























































































































Search results

Summary of Contents for HTR-N5060

Reviews:

Related manuals for HTR-N5060

Brands by name

Popular brands

Yamaha HTR-N5060, Owner'S Manual

Search results

Summary of Contents for HTR-N5060

Reviews:

Related manuals for HTR-N5060

Brands by name

Popular brands