32
En
FM/AM tuning
y
•
You can select the preset number at which the preset starts by
pressing
e
PRESET
k
/
n
or
j
Cursor
k
/
n
while “READY”
is displayed on the front panel display.
•
To cancel registration, press
j
RETURN
.
During the automatic station preset, “MEMORY”
appears in the front panel display each time a station
is registered.
When registration is complete, “FINISH” appears
and then the display returns to the Option menu.
To return the display to the original state, press
s
OPTION
.
You can manually register FM stations with weak signals
or AM stations.
1
Tune into the desired station (page 31).
2
Press
G
MEMORY
(or
e
MEMORY
).
“Manual Preset” appears on the front panel display,
followed soon by the preset number to which the
station will be registered.
y
•
By holding down
G
MEMORY
(or
e
MEMORY
) for more than
2 seconds, you can skip the following steps and automatically
register the selected station to an empty preset number (next to the
lastly-registered preset number).
3
Press
F
PRESET
l
/
h
(or
e
PRESET
k
/
n
)
to select the preset number to which the
station will be registered.
When you select a preset number to which no station
is registered, “Empty” appears. When you select a
preset number to which any station has been already
registered, the frequency of the station is displayed.
y
•
You can also select a preset number using the
l
Numeric
keys
.
4
Press
G
MEMORY
(or
e
MEMORY
).
When registration is complete, the display returns to
the original state.
y
•
To cancel registration, press
j
RETURN
or leave this unit
without any operations for about 30 seconds.
You can call preset stations registered by automatic station
preset or manual station preset.
Press
F
PRESET
l
/
h
(or
e
PRESET
k
/
n
) to
select a preset number.
y
•
Preset numbers to which no stations are registered are skipped.
•
“No Presets” or “No Presets in Memory” is displayed if no stations are
registered.
•
You can directly select a preset number by pressing
l
Numeric keys
while calling a preset station. “Empty” appears on the display if you
enter a preset number to which no station is registered. “Wrong Num.”
appears if you enter an invalid number.
•
When you press
l
Numeric keys
during normal tuning, a frequency
is entered. Set tuning mode to preset tuning mode using
F
PRESET
l
/
h
(or
e
PRESET
k
/
n
) prior to the operation.
1
Rotate the
T
INPUT
selector (or press
d
TUNER
) to select “TUNER” as the input
source.
2
Press
s
OPTION
on the remote control.
The Option menu for “TUNER” is displayed
(page 41).
3
Press
j
Cursor
k
/
n
to select “Clear Preset”
and then press
j
ENTER
.
y
•
To cancel the operation and return to the Option menu, press
j
RETURN
.
4
Press
j
Cursor
k
/
n
to select a preset
number to reset and then press
j
ENTER
.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat step 4.
5
To exit the Option menu, press
s
OPTION
.
Registering stations by manual station
preset
01:FM87.5MHz
Preset number
Frequency
Status
01:Empty
Flashes
Frequency to be registered
Preset
number
Calling a preset station (Preset tuning)
Clearing preset stations
01:FM92.5MHz
Preset number
