Yamaha HTR-6250 Page 55 Owner'S Manual Download

Page: 55 / 74

Troubleshooting

English

INTR

ODUCTION

APPENDIX

PRE

ARA

ION

OPERA

ION

ANCED

OPERA

ION

Notes

•

If the “ERROR” or “WARNING” screen appears, resolve the problem and then run “Auto Setup” again.

•

Warning message “W-2” or “W-3” indicates that the adjusted settings may not be optimal.

•

Depending on the speakers, warning message “W-1” may appears even if the speaker connections are correct.

•

If error message “E-10” occurs repeatedly, contact a qualified Yamaha service center.

Disconnected

Your iPod is removed from the Yamaha

iPod universal dock.

Place your iPod in the Yamaha iPod universal dock.

Unable to play

This unit cannot play back the songs

currently stored on your iPod.

Check that the songs currently stored on your iPod

are playable.

—

Store some other playable music files on your iPod.

—

Bluetooth™

Problem

Cause

Remedy

See

page

Searching...

The Bluetooth wireless audio receiver and

the Bluetooth component are in the

middle of the pairing.

The Bluetooth wireless audio receiver and

the Bluetooth component are in the

middle of establishing the connection.

Completed

The pairing is completed.

Canceled

The pairing is canceled.

BT Connected

The connection between the Yamaha

Bluetooth wireless audio receiver and the

Bluetooth component is established.

BT Disconnected

The Bluetooth component is disconnected

from the Yamaha Bluetooth wireless

audio receiver.

Auto Setup (YPAO)

Before Auto Setup

Error message

Cause

Remedy

See

page

Connect MIC!

Optimizer microphone is not connected.

Connect the supplied optimizer microphone to the

OPTIMIZER MIC jack on the front panel.

Unplug HP!

Headphones are connected.

Unplug the headphones.

—

Memory Guard!

The parameters of this unit are protected.

Set “Memory Guard” to “Off.”

During Auto Setup

Error message

Cause

Remedy

See

page

E-1:NO FRONT SP

Front L/R channel signals are not

detected.

Check the front L/R speaker connections.

E-2:NO SUR. SP

Only a signal from one of the surround

channels are detected.

Check the surround L/R speaker connections.

Problem

Cause

Remedy

See

page

Summary of Contents for HTR-6250










































































Search results

Summary of Contents for HTR-6250

Reviews:

Related manuals for HTR-6250

Brands by name

Popular brands

Yamaha HTR-6250, Owner'S Manual

Search results

Summary of Contents for HTR-6250

Reviews:

Related manuals for HTR-6250

Brands by name

Popular brands