Yamaha HTR-6230BL, Owner'S Manual

Page: 23 / 62

19
En
Playback
English
INTR
ODUCTION
AD
DITIONAL
INFORMA
T
ION
APPENDIX
PRE
P
ARA
T
ION
BA
S
IC
OPERA
T
ION
AD
V
ANCED
OPERA
T
ION
Use the following features to adjust the audio output or
speaker level.
■
Muting the audio output
Press
e
MUTE on the remote control to mute the
audio output. Press
e
MUTE again to resume
the audio output.
y
• You can also rotate
P
VOLUME (or press
m
/– ) to
resume the audio output.
• You can configure the muting level by using “MUTE TYP.” in “SOUND
MENU” (see page 34).
•
The MUTE indicator flashes on the front panel display when the audio
output is muted and disappears from the front panel display when the
audio output is resumed.
■
Adjusting the tonal quality
Use this feature to adjust the balance of bass and treble for
the front left and right speaker channels.
Press
K
TONE CONTROL repeatedly to select
“BASS” or “TREBLE” and then press
L
PROGRAM
l
/
h
to adjust the corresponding
frequency response level.
Control range: –10 to +10 dB
Each choice is defined as follows.
Notes
• Speaker and headphone adjustments are stored independently.
• If you increase or decrease the high-frequency or low-frequency sound to
an extreme level, the tonal quality of the surround speakers may not
match that of the front left and right speakers.
• This does not affect recorded material.
■
Adjusting the speaker level
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
Note
• This operation will override the level adjustment made in “SP LEVEL”
(see page 33).
1
Press
h
AMP and then press
j
BAND
LEVEL TITLE repeatedly to select the
speaker you want to adjust.
y
•
Once you press
j BAND LEVEL TITLE
on the remote
control, you can also select the speaker by pressing
l
k
/
n
.
• The available speaker channels differ depending on the speaker
settings.
2
Press
l l
/
h
on the remote control (or
press
F
PRESET/TUNING
l
/
h
) to adjust
the speaker output level.
Control range: –10.0 dB to +10.0 dB
Use the following features to utilize various useful
functions equipped on this unit.
■
Using your headphones
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
y
• When you select a sound field program, SILENT CINEMA mode is
automatically activated (see page 26).
Notes
• When you connect headphones, no signals are output at the speaker
terminals.
• All Dolby Digital and DTS audio signals are mixed down to the left and
right headphone channels.
■
Selecting the night listening mode
The night listening modes are designed to improve
listenability at lower volumes or at night.
1
Press
O
NIGHT (or press
h
AMP and then
u
NIGHT ) repeatedly to select
“NIGHT:CINEMA” or “NIGHT:MUSIC.”
Each choice is defined as follows.
y
• When a night listening mode is selected, the NIGHT indicator
lights up on the front panel display.
2
Press
l
l
/
h
to adjust the effect level while
“NIGHT:CINEMA” or “NIGHT:MUSIC” is
displayed on the front panel display.
Each choice is defined as follows.
Using audio features
Choice Function
BASS Adjusts the low-frequency response.
TREBLE
Adjusts the high-frequency response.
Choice Description
FRONT L
Front left speaker
FRONT R
Front right speaker
CENTER
Center speaker
SWFR
Subwoofer
SUR.L
Surround left speaker
SUR.R
Surround right speaker
Using optional features
Choice Function
NIGHT:CINEMA
Narrows the dynamic range of film
soundtracks and makes dialog easier to
hear at lower volumes.
NIGHT:MUSIC
Preserves ease-of-listening for all
sounds.
NIGHT OFF
Disables this feature.
Choice Function
MIN Slightly lowers the effect level.
MID
* Moderately lowers the effect level.
MAX
Considerably lowers the effect level.