Yamaha HTR-6072 Owner'S Manual Download Page 10

Page: 10 / 147

Part names and functions

Part names and functions of the front panel

The part names and functions of the front panel are as follows.

PROGRAM

TONE CONTROL

STRAIGHT

(CONNECT)

AUX

USB

AUDIO

SCENE

INPUT

PHONES

SILENT CINEMA

YPAO MIC

MEMORY

INFO (WPS)

PRESET

TUNING

DIRECT

VOLUME

DVD

NET

RADIO

D E F

(power) key

Turns on/off (standby) the unit.

Standby indicator

Lights up when the unit is in standby mode under any of
the following conditions.

• HDMI Control is enabled (p.88)
• Standby Through is enabled (p.88)
• Network Standby is enabled (p.101)
• Bluetooth Standby is enabled (p.103)

YPAO MIC jack

For connecting the supplied YPAO microphone (p.33).

Remote control sensor

Receives remote control signals (p.7).

INFO (WPS) key

Selects the information displayed on the front display
(p.47).
Enters the wireless LAN connection setup (WPS button
configuration) by holding down for a few seconds (p.125).

MEMORY key

Registers FM/AM radio stations as preset stations (p.52).
Registers Bluetooth, USB, or network content as a shortcut
by holding down for a few seconds (p.65).

PRESET keys

Select a preset FM/AM radio station (p.52).
Recall Bluetooth, USB, or network content that is registered
as a shortcut (p.66).

FM and AM keys

Switch between FM and AM (p.51).

TUNING keys

Select the radio frequency (p.51).

Front display

Displays information (p.12).

DIRECT key

Enables/disables the direct playback mode (p.41).

PHONES jack

For connecting headphones.

INPUT keys

Select an input source.

TONE CONTROL key

Adjusts the level of high-frequency range (Treble) and low-
frequency range (Bass) individually (p.69).

Summary of Contents for HTR-6072




















































































































































Search results

Summary of Contents for HTR-6072

Reviews:

Related manuals for HTR-6072

Brands by name

Popular brands

Yamaha HTR-6072, Owner'S Manual

Search results

Summary of Contents for HTR-6072

Reviews:

Related manuals for HTR-6072

Brands by name

Popular brands