29
En
Playback
BA
S
IC
OPERA
T
ION
English
2
Press
G
l
/
h
to adjust the effect level while
“NIGHT:CINEMA” or “NIGHT:MUSIC” is
displayed in the front panel display.
Choices: MIN,
MID
, MAX
• Select “MIN” for minimum compression.
• Select “MID” for standard compression.
• Select “MAX” for maximum compression.
y
“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are
stored independently.
• You cannot use the night listening modes in the following cases:
– when the component connected to the MULTI CH INPUT
jacks is selected as the input source.
– when headphones are connected to the PHONES jack.
• The night listening modes may vary in effectiveness depending
on the input source and surround sound settings you use.
■
Selecting audio input jacks
(AUDIO SELECT)
This unit comes with a variety of input jacks. Use this
feature (audio input jack select) to switch the input jack
assigned to an input source when more than one jacks are
assigned to an input source.
y
• We recommend setting audio input jack select to “AUTO” in
most cases.
• You can adjust the default audio input jack select of this unit by
using “AUDIO SELECT” in “OPTION MENU” (see page 50).
Press
E
AUDIO SELECT
(or
B
AUDIO SEL
)
repeatedly to select the desired Audio input jack
select setting.
AUTO
Automatically selects input signals in the
following order:
(1) Digital signals
(2) Analog signals
ANALOG
Selects only analog signals. If no analog
signals are input, no sound is output.
This feature is not available when no digital input jack are
assigned to the currently selected input source.
■
Adjusting the tonal quality
Use this feature to adjust the balance of bass and treble for
the front left and right speaker channels.
Press
0
TONE CONTROL
repeatedly to select
“BASS” or “TREBLE” and then press
A
PROGRAM
l
/
h
to adjust the corresponding
frequency response level.
• Select “BASS” to adjust the low-frequency response.
• Select “TREBLE” to adjust the high-frequency
response.
• Speaker and headphone adjustments are stored independently.
• If you increase or decrease the high-frequency or low-frequency
sound to an extreme level, the tonal quality of the surround
speakers may not match that of the front left and right speakers.
■
Adjusting speaker levels during
playback
You can adjust the output level of each speaker while
listening to a music source.
This operation will override the level adjustment made in “SP
LEVEL” (see page 46).
1
Press
D
AMP
and then press
F
LEVEL
repeatedly to select the speaker you want to
adjust.
y
Once you press
F
LEVEL
on the remote control, you can
also select the speaker by pressing
G
k
/
n
.
2
Press
G
l
/
h
on the remote control to
adjust the speaker output level.
The control range is from –10 dB to +10 dB.
y
You can press
4
A/B/C/D/E
to select a speaker and then
5
PRESET/TUNING/CH
l
/
h
to adjust the speaker output
level.
Notes
Note
A.SEL:AUTO
DVR
DVD
CD
XM
V-AUX
DTV/CBL
MD/CD-R
TUNER
Audio input jack
select setting
Notes
Note
Display
Adjusted speaker
FRONT L
Front left speaker
FRONT R
Front right speaker
CENTER
Center speaker
SUR.L
Surround left speaker
SUR.R
Surround right speaker
SWFR
Subwoofer
