Yamaha HTR-5560 Page 36 Owner'S Manual Download

Page: 36 / 67

CINEMA-DSP

CINEMA-DSP programs

■

For movie programs: No. 7 to 9

This unit automatically chooses the appropriate decoder and DSP sound field pattern according to the input signal
format.

Table of Program Names for Each Input Format

MOVIE
THEATER 1

MOVIE
THEATER 2

DOLBY
DIGITAL

DTS DIGITAL
SUR

PRO LOGIC

2 channel

Stereo

70 mm Spectacle

70 mm Sci-Fi

70 mm Adventure

70 mm General

—

Normal

Enhanced

Movie

Music

DOLBY DIGITAL

DGTL Spectacle

DGTL Sci-Fi

DGTL Adventure

DGTL General

Normal

Enhanced

—

5.1 channel

DTS

DTS Spectacle

DTS Sci-Fi

DTS Adventure

DTS General

—

Normal

Enhanced

—

DTS-ES

compatible

Spectacle ES

Sci-Fi ES

Adventure ES

General ES

—

DTS-ES

Enhanced ES

—

6.1 channel *

Input

Program

DOLBY DIGITAL

Spectacle EX

Sci-Fi EX

Adventure EX

General EX

Dolby D EX

Enhanced EX

—

* means the Dolby Digital EX decoder or the DTS-ES compatible decoder is ON.

• If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will automatically switch to

the Dolby Digital playback sound field or DTS playback sound field.

• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the EX/ES button on the

remote control, the Dolby Digital EX or DTS-ES compatible decoder usually turns on and the corresponding DSP program is
selected.

• EX/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with the rear center speaker. In this case

the program name changes to the corresponding name for 6.1 channel.

• When playing a 6.1 channel source with the Dolby Digital EX decoder or the DTS-ES compatible decoder turned off, the program

name changes to the corresponding name for 5.1 channel.

Notes

• The “

” indicator does not light up when selecting program No. 9 except in Enhanced mode.

• When playing a monaural source with a CINEMA DSP program, the source signal is directed to the center channel, main and rear

speakers output effect sounds.

No.

0106HTR5560_29-33_EN(U)

12/28/01, 7:13 PM

Summary of Contents for HTR-5560




































































Search results

Summary of Contents for HTR-5560

Reviews:

Related manuals for HTR-5560

Brands by name

Popular brands

Yamaha HTR-5560, Owner'S Manual

Search results

Summary of Contents for HTR-5560

Reviews:

Related manuals for HTR-5560

Brands by name

Popular brands