13
RX-V396/RX-V396RDS/HTR-5230/HTR-5230RDS
No.2 DSP THROUGH
The input is automatically discriminated by signal detection and switched with priorities Coaxial>Optical>Analog.
There are the following three sub-menus.
1. YSS+SRAM
The L/R signals are output without being processed to the MAIN L/R, CENTER/SUBWOOFER through the DSP.
The L/R signals are output without being processed to the REAR L/R through the DSP and the SRAM.
(Remote control code 7A-89:"2" key [DSP mode])
2. YSS M
Same as "2. DSP 0dB" of "No.1 ANALOG THROUGH", except for the input switching.
3. DSP FULL BIT
Same as the above menu, except that the head margin is disabled, and the digital data is output with full bits from
AC3Dav to DAC.
• INPUT : DVD/LD (Analog signal)
(Lch and Rch, 1KHz, –30dBV)
• OUTPUT : SPEAKERS
MAIN L : 14.0 dBV
REAR L : 23.3 dBV
MAIN R : 14.0 dBV
REAR R : 23.3 dBV
CENTER: 17.2 dBV
2 Y S S + S R AM M
2 Y S S M
2 D S P F U L L B I T
DIR2
CODEC.DAC
CS4227
YM3436
CODEC.ADC
AC3Dav(YSS908)
CS4227
DECODER
256K SRAM
DSP
ANALOG IN
L/R
MAIN L
MAIN R
DIGITAL IN
L/R L/R
DIR2
CODEC.DAC
CS4227
YM3436
CODEC.ADC
AC3Dav(YSS908)
CS4227
DECODER
256K SRAM
DSP
ANALOG IN
L/R
MAIN R
REAR L
REAR R
CENTER
SUBWOOFER
CENTER
SUBWOOFER
L/R
L/R
L/R
DIGITAL IN
MAIN L
: This shows that the device is not operating.
L/R
L/R
• INPUT : DVD/LD (Analog signal)
(Lch and Rch, 1KHz, –20dBV)
• OUTPUT : SPEAKERS
MAIN L : 24.0 dBV
REAR L : 24.0 dBV
MAIN R : 24.0 dBV
REAR R : 24.0 dBV
CENTER: 24.0 dBV
• INPUT : DVD/LD (Analog signal)
(Lch and Rch, 1KHz, –20dBV)
• OUTPUT : SPEAKERS
MAIN L : 24.0 dBV
REAR L : 24.0 dBV
MAIN R : 24.0 dBV
REAR R : 24.0 dBV
CENTER: 24.0 dBV
REAR L
REAR R
L/R