Yamaha HTR-5065, Owner'S Manual, Page: 139 / 478

11
En
E
n
g
lis
h
Conn
ecti
on
2
■
Connecting to the NETWORK terminal
– PC contents can be played back by connecting this Player to the network.
– You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live
compatible discs. Refer to page 20 regarding further information on BD-Live functions.
– Firmly connect a network cable (commercially available) to the NETWORK terminal.
– Use only an STP (shielded twisted pair) network cable.
– When using the internet, a broadband internet connection as shown below is required.
– Connect the other connector of the network cable to the hub/broadband router.
– When using a broadband internet connection, a contract with an internet service provider is required. For more
details, contact your nearest internet service provider.
– Refer to the operation manual of the equipment you have as the connected equipment and connection method may
differ depending on your internet environment.
– Use a network cable/router supporting 10BASE-T/100BASE-TX.
■
Connecting to the USB connector
– You can connect a USB memory device for Local Storage to the USB connector on the rear panel (or front panel) of
this Player to save the BD-Live data, or to upgrade the software of this Player.
– Firmly connect a USB memory device (commercially available) to the USB connector.
After connecting
– When you set the Network setting manually, refer to “Network” (p. 25).
– To play back the PC contents on your network, refer to “Using network content” (p. 15).
Network and USB connection
Notes
CAUTION:
– Do not remove the USB memory device or
unplug the power cable while the operations for
BD-Live (p. 20) or software upgrade are being
performed.
– Do not use a USB extension cable when
connecting a USB memory device to the USB
connector of this Player. Using a USB
extension cable may prevent the Player from
performing correctly.
– Yamaha cannot guarantee that all brands’ USB
memory devices will operate with this Player.
Note
U S B 0.5A 5V HDMI
NETWORK
LAN
This Player
To NETWORK
terminal
Internet Modem
Network cable
(commercially available)
Hub or
broadband router
PC
To USB
connector
USB memory device
(commercially available)
To LAN
terminal
– To save BD-Live data on
the USB memory device
on the front panel, set
Local Storage to Front
USB (p. 24).
Hint