■
SPECIFICATIONS
■
Audio Section
Minimum RMS Output Power (Power Amp. Section)
(1 kHz, 0.9 % THD)
U, C models (8 ohms)
FRONT L/R .......................................................... 100 W/ch
CENTER ................................................................... 100 W
SURROUND L/R ................................................. 100 W/ch
R, T, K, A, B, G, F, L models (6 ohms)
FRONT L/R .......................................................... 100 W/ch
CENTER ................................................................... 100 W
SURROUND L/R ................................................. 100 W/ch
Maximum Power (JEITA)
(1 kHz, 10 % THD, 6 ohms)
[R, T, K, L models]
FRONT L/R ............................................................ 135 W/ch
CENTER ..................................................................... 135 W
SURROUND L/R .................................................... 135 W/ch
Max. Power Per Channel
(1 kHz, 0.7 % THD, 4 ohms)
[B, G, F, L models]
FRONT L/R ............................................................ 120 W/ch
CENTER ..................................................................... 120 W
SURROUND L/R .................................................... 120 W/ch
IEC Power
(1 kHz, 0.9 % THD, 8 ohms) [B, G, F, L models]
FRONT L/R .............................................................. 95 W/ch
Dynamic Power Per Channel (IHF)
(FRONT L/R drive)
U, C models
(8/6/4/2 ohms) ..................................... 110/130/160/180 W
R, T, K, A, B, G, F, L models
(6/4/2 ohms) ............................................... 105/130/150 W
Dynamic Headroom
[U, C models]
(8 ohms) ...................................................................0.23 dB
Input Sensitivity/Input Impedance
AV5, etc. ............................................... 200 mV / 47 k-ohms
Maximum Input Signal
(1 kHz, 0.5 % THD, Effect on)
AV5, etc. ..........................................................2.3 V or more
Output Level/Output Impedance
AUDIO OUT (REC) .............................. 200 mV / 1.2 k-ohms
SUBWOOFER (2 ch STEREO and FRONT SP: Small)
................................................................. 1 V / 1.2 k-ohms
Headphone Jack Rated Output/Impedance
AV5, etc. (1 kHz, 50 mV, 8 ohms) .......... 100 mV / 470 ohms
Frequency Response
(10 Hz to 100 kHz)
AV5, etc. to FRONT L/R ........................................0 / -3.0 dB
Total Harmonic Distortion
(1 kHz, 50 W)
AV5, etc. (straight) to FRONT L/R SP OUT
U, C models
(8 ohms) ....................................................0.06 % or less
R, T, K, A, B, G, F, L models
(6 ohms) .....................................................0.06 % or less
Signal to Noise Ratio (IHF-A Network)
AV5, etc. (STEREO) (Input shorted) to SP OUT
250 mV ........................................................ 98 dB or more
Residual Noise (IHF-A Network)
FRONT L/R SP OUT ........................................150 μV or less
Channel Separation
AV5, etc. (Input 5.1 k-ohms shorted, 1 kHz / 10 kHz)
.......................................... 60 dB or more / 45 dB or more
Volume Control
............................ MUTE / -80 dB to +16.5 dB / 0.5 dB step
Tone Control Characteristics
BASS
Boost/Cut ................................ ±10 dB / 2 dB step / 50 Hz
Turnover frequency ................................................. 350 Hz
TREBLE
Boost/Cut ...............................±10 dB / 2 dB step / 20 kHz
Turnover frequency ................................................ 3.5 kHz
Filter Characteristics
FRONT, CENTER, SURROUND (H.P.F.)
........ fc=40/60/80/90/100/110/120/160/200 Hz, 12 dB/oct.
SUBWOOFER (L.P.F.)
........ fc=40/60/80/90/100/110/120/160/200 Hz, 24 dB/oct.
■
Video Section
Composite Video Signal Level
..................................................................1 Vp-p / 75 ohms
Component Signal Level
Y ................................................................1 Vp-p / 75 ohms
P
B
/P
R
......................................................0.7 Vp-p / 75 ohms
Video Maximum Input Level (VIDEO COMV. OFF)
................................................................... 1.5 Vp-p or more
Signal to Noise Ratio (IHF)
...................................................................... 50 dB or more
Monitor Out Frequency Response
Component video signal ..................5 Hz to 60 MHz, ±3 dB
■
FM Section
Tuning Range
U, C models ............................................ 87.5 to 107.9 MHz
R, L models ................. 87.5 to 108.0 / 87.50 to 108.00 MHz
T, K, A, B, G, F models ........................ 87.50 to 108.00 MHz
50 dB Quieting Sensitivity (IHF)
(1 kHz, 100 % Mod.)
Mono ............................................................ 3 μV (20.8 dBf)
Signal to Noise Ratio (IHF)
Mono ...........................................................................74 dB
Stereo ..........................................................................69 dB
Harmonic Distortion
(1 kHz)
Mono ........................................................................... 0.3 %
Stereo .......................................................................... 0.3 %
Antenna Input
............................................................ 75 ohms unbalanced
12
RX-V367/HTR-3063
RX-V367/HTR-3063
Summary of Contents for HTR-3063
