Yamaha HTR-2866 Owner'S Manual Download Page 4

Page: 4 / 73

Accessories

Accessories

Check that the following accessories are supplied with the product.

Remote control

Batteries (AAA, R03, UM-4) (x2)

Insert the batteries the right
way round.

AM antenna

FM antenna

*One of the above is supplied depending on the region of

purchase.

CD-ROM (Owner’s Manual)

Easy Setup Guide

Safety Brochure

Operating range of the remote control

• Point the remote control at the remote control sensor on the unit and remain within the operating range

shown below.

• Some features are not available in certain regions.

• Due to product improvements, specifications and appearance are subject to change without notice.

• This manual explains operations using the supplied remote control.

•

indicates precautions for use of the unit and its feature limitations.

•

indicates supplementary explanations for better use.

30°

Within 6 m (20 ft)

Summary of Contents for HTR-2866










































































Search results

Summary of Contents for HTR-2866

Reviews:

Related manuals for HTR-2866

Brands by name

Popular brands

Yamaha HTR-2866, Owner'S Manual

Search results

Summary of Contents for HTR-2866

Reviews:

Related manuals for HTR-2866

Brands by name

Popular brands