Yamaha Harmony Director HD-300, Owner'S Manual, Page: 23 / 48

Demonstrating Tempo and Rhythm (Metronome, Rhythm Style)
HD-300 Owner’s Manual 23
Metronome (Simple)
Press the
[BEAT] button
to change rhythm playback to metronome
mode.
When in “Beat • Tempo Memory” mode, press the BEAT • TEMPO
MEMORY [MEMORY] button to turn Beat • Tempo Memory off.
Press the [BEAT] button to move the cursor to the beat area.
Use the CURSOR [
L ][ R ] buttons to move the cursor to the value you want to change. Change the value with the [-]/[+]
buttons, or the dial. The numerator can be set from 1 – 9, while the denominator can be set to 4 or 8.
You can adjust the volume of each note type of the metronome, by using
the [ACCENT], [ ], [ ], [
], and [ ] sliders.

Sounding Timing Chart (4/4)
Notes marked

are not played when the “Metronome Pattern” (page 31) is set to
“Alternate.”

Sounding Timing Chart (6/8)
The quarter notes do not sound and the triplets sound at a double tempo of the triplet.
Notes marked

are not played when the “Metronome Pattern” (page 31) is set to “Alternate.”
Using a Simple Metronome
Setting the Beat
Adjusting the Metronome Volume
ACCENT
ACCENT