4-23
4
Adjust the spring preload as follows.
Turn the spring preload adjusting ring in direction
(a) to increase the spring preload and thereby
harden the suspension, and in direction (b) to de-
crease the spring preload and thereby soften the
suspension.
Align the appropriate notch in the adjusting ring
with the position indicator on the shock absorber.
TIP
A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
EBU28972
Trailer hitch (YFM70GPSG /
YFM70GPLG)
This ATV is equipped with a 5 cm (2 in) trailer hitch
receiver.
1. Spring preload adjusting ring
2. Position indicator
1. Special wrench
Spring preload setting:
Minimum (soft):
1
Standard:
2
Maximum (hard):
5
U2UD60E0.book Page 23 Tuesday, April 28, 2015 11:55 AM