manualshive.com logo in svg

Yamaha Grizzly 700 FI, Owner'S Manual

Share
Download
Yamaha Grizzly 700 FI Owner'S Manual Download Page 137

8-44

8

TIP

If water drains from the V-belt case after removing
the plug, have a Yamaha dealer check the ATV as
the water may affect other engine parts.

EBU24045

Adjusting the throttle cable free play 

The throttle cable free play should be checked
and, if necessary, adjusted at the intervals speci-
fied in the periodic maintenance and lubrication
chart.

The throttle cable free play should measure 3.0–
5.0 mm (0.12–0.20 in) at the throttle lever. Period-
ically check the throttle cable free play and, if nec-
essary, adjust it as follows.

TIP

The engine idling speed must be checked, and ad-
justed if necessary, before adjusting the throttle ca-
ble free play.

1. Slide the rubber cover back.
2. Loosen the locknut.
3. To increase the throttle cable free play, turn

the throttle cable free play adjusting bolt in di-
rection (a). To decrease the throttle cable free
play, turn the adjusting bolt in direction (b).

1. V-belt case drain plug

U43P10E0.book  Page 44  Thursday, May 15, 2008  2:55 PM

Summary of Contents for Grizzly 700 FI



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands