Yamaha GRIZZLY 700 FI YFM7FGPY, Owner'S Manual

Page: 52 / 164

6-1
6
EBU19880
OPERATION
EBU19900
Read the Owner’s Manual carefully before riding
the ATV.
WARNING
EWB00630
Read the Owner’s Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury. If there is a control or func-
tion you do not understand, ask your Yamaha
dealer.
EBU27344
Starting the engine
WARNING
EWB00640
Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or do
not work smoothly, you could be unable to
control the ATV, which could lead to an acci-
dent or collision.
NOTICE
ECB00150
See the “Engine break-in” section on page 6-4
prior to operating the engine for the first time.
1. Turn the main switch to “ON” and the engine
stop switch to “ ”.
The following warning lights should come on
for a few seconds, then go off.
●
Coolant temperature warning light
●
Engine trouble warning light
The EPS warning light should come on, then
go off when the engine is started.
NOTICE
ECB00823
If a warning light does not go off, see page 4-2
for the corresponding warning light circuit
check.
2. Apply the brake pedal, and then shift the drive
select lever into the neutral or park position.
The corresponding indicator light should
come on. If the indicator light does not come
on, have a Yamaha dealer check the electrical
circuit.
U43P61E0.book Page 1 Friday, October 17, 2008 2:18 PM