manualshive.com logo in svg

Yamaha GRIZZLY 700 FI YFM7FGPX, Owner'S Manual

The Yamaha GRIZZLY 700 FI YFM7FGPX is a powerful and reliable all-terrain vehicle, perfect for outdoor enthusiasts. With its user-friendly features and cutting-edge technology, this machine delivers exceptional performance. To explore its full potential, make sure to download the free Owner's Manual from manualshive.com for step-by-step instructions and valuable information.

Share
Download
background image

4-18

4

To install the seat

Insert the projections on the front of the seat into
the seat holders and push down on the seat at the
rear.

NOTE:

Make sure that the seat is securely fitted.

EBU27361

Storage compartments 

This ATV is equipped with two storage compart-
ments.

The front storage compartment is located at the
front right side of the ATV. To access the storage
compartment, remove the storage compartment
cover by turning it counterclockwise.

1. Projection

2. Seat holder

1. Front storage compartment cover

U3B462E0.book  Page 18  Tuesday, March 20, 2007  11:46 AM

Summary of Contents for GRIZZLY 700 FI YFM7FGPX





































































































































































Reviews:

No comments

Related manuals for GRIZZLY 700 FI YFM7FGPX

Yamaha GRIZZLY 350 YFM35FGZ Owner'S Manual preview
GRIZZLY 350 YFM35FGZ
Brand: Yamaha Pages: 142

Brands by name

Popular brands

Load more brands